User Manual

Memory configuration matrix
Table 6. Memory configuration matrix
Configuration
Slot
DIMM1 DIMM2
4 GB DDR4 4 GB
8 GB DDR4 4 GB 4 GB
8 GB DDR4 8 GB
16 GB DDR4 8 GB 8 GB
16 GB DDR4 16 GB
32 GB DDR4 16 GB 16 GB
32 GB DDR4 32 GB
64 GB DDR4 32 GB 32 GB
Intel Optane Memory H10 with Solid State Storage
(optional)
Intel Optane Memory technology utilizes 3D XPoint memory technology and functions as a non-volatile storage cache/
accelerator and/or storage device depending on the Intel Optane Memory installed in your computer.
Intel Optane Memory H10 with Solid State Storage functions as both a non-volatile storage cache/accelerator (enabling
enhanced read/write speeds for hard-drive storage) and a solid-state storage solution. It neither replaces nor adds to the
memory (RAM) installed on your computer.
Table 7. Intel Optane Memory H10 with Solid State Storage specifications
Description Values
Interface
PCIe 3 x4 NVMe
● One PCIe 3 x2 for Optane memory
● One PCIe 3 x2 for solid-state storage
Connector
M.2
Form factor 2280
Capacity (Intel Optane memory) Up to 32 GB
Capacity (solid-state storage) Up to 512 GB
NOTE: Intel Optane Memory H10 with Solid State Storage is supported on computers that meet the following requirements:
● 9
th
Generation or higher Intel Core i3/i5/i7 processors
● Windows 10 64-bit version or higher (Anniversary Update)
● Intel Rapid Storage Technology driver version 15.9.1.1018 or higher
External ports
Table 8. External ports
Description Values
Network port/slots Rear
● One RJ45 Ethernet port
Specifications of OptiPlex 5090 Micro 15