Installation instructions

www.dell.com | support.dell.com
1-10 Installation Instructions
command in Windows Server 2003 no longer displays this
information.
To view the NIC connection order, click the Start button and select
Settings→ Network Connections→ Advanced→ Advanced
Settings→ Connections.
SCSI and RAID Controllers
• The operating system does not shut down after you install a PERC
3/QC card (PowerEdge 7150 systems only).
If you add a PERC 3/QC card to a PowerEdge 7150 system after you
install Windows Server 2003 using the QLogic 12160 controller, the
operating system may not shut down.
To avoid this issue, upgrade the PERC 3/QC card’s firmware to
version 1.61 or later before you install the PERC 3/QC card in your
system. You can download the firmware from the Dell Support
website at support.dell.com.
If a PERC card was installed in your system, clear the configuration
from the system by performing the following steps:
a During system startup, press <Ctrl><m>.
b Select Configure→ Clear Configuration→ Yes.
c Press <Esc> several times to return to the main Management
Menu.
d Press <Ctrl><Alt><Delete> to restart your system.
• A yellow "bang" appears in Device Manager for the RAID
controller.
If you install a PERC 3/QC card into a PowerEdge 7150 system and
the firmware is not updated to version 1.61 or later, a yellow "bang"
appears in Device Manager for the RAID controller.