Specifications


memory module cover — Covers the compartment that contains the memory module(s). See "Adding and Replacing Parts."

battery-bay latch release — Releases the battery. See Using a Battery for instructions.

battery charge gauge — Provides information on the battery charge. See Using a Battery.

battery — When a battery is installed, you can use the computer without connecting the computer to an electrical outlet. See Using a Battery.

docking device slot — Lets you attach your computer to a docking device. See the documentation that came with your docking device for additional
information.

fan — The computer uses an internal fan to create airflow through the vents, which prevents the computer from overheating.


modem/coin-cell battery cover — Covers the compartment that contains the modem and the coin-cell battery. See "Adding and Replacing Parts."

hard drive — Stores software and data.
Back to Contents Page

1
memory module cover
5
docking device slot
2
battery-bay latch release
6
fan
3
battery charge gauge
7
modem/coin-cell battery cover
4
battery
8
hard drive
CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your computer in a low-airflow environment,
such as a closed briefcase, while it is running. Restricting the airflow can damage the computer or cause a fire.
NOTE: The computer turns on the fan when the computer gets hot. Fan noise is normal and does not indicate a problem with the fans or the computer.