Dell™ Latitude™ D610 User's Guide Finding Information Using the Module Bay About Your Computer Solving Problems Using Microsoft® Windows® XP Using the Dell Diagnostics Dell™ QuickSet Cleaning Your Computer Using the Keyboard and Touch Pad Reinstalling Software Using the Display Adding and Replacing Parts Using CDs, DVDs, and Other Multimedia Using the System Setup Program Using a Battery Alert Standard Format (ASF) Wireless Local Area Network Getting Help Using PC Cards Specifications Us
Back to Contents Page About Your Computer Dell™ Latitude™ D610 User's Guide Front View Left View Right View Back View Bottom View Front View 1 display 7 speakers 2 power button 8 track stick/touch pad buttons 3 device status lights 9 track stick 4 keyboard 10 volume control buttons 5 touch pad 11 mute button 6 display latch 12 keyboard and wireless status lights display — For more information about your display, see "Using the Display.
Turns on when you turn on the computer and blinks when the computer is in a power management mode. Turns on when the computer reads or writes data. NOTICE: To avoid loss of data, never turn off the computer while the light is flashing. Turns on steadily or blinks to indicate battery charge status. If the computer is connected to an electrical outlet, the ¡ ¡ Solid green: The battery is charging. Flashing green: The battery is almost fully charged.
The green lights located above the keyboard indicate the following: Turns on when the numeric keypad is enabled. Turns on when wireless devices are enabled. Turns on when the uppercase letter function is enabled. Turns on when Mini PCI functionality and Bluetooth® wireless technology are enabled. To enable or disable Mini PCI functionality and Bluetooth wireless technology, press . NOTE: Bluetooth wireless technology is an optional feature on your computer, so the technology with your computer.
When you receive your computer, the sensor is disabled. You can use the system setup program to enable the sensor. For information on transferring data, see Windows Help, the Help and Support Center, or the documentation that came with your infrared-compatible device. audio connectors Attach headphones or speakers to the Attach a microphone to the connector. connector. hard drive — Stores software and data.
3 USB connectors (2) module bay — You can install devices such as an optical drive or a Dell TravelLite™ module in the module bay. For more information, see "Using the Module Bay." device latch release — Releases the module bay device. See "Using the Module Bay" for instructions.
Connects a parallel device, such as a printer. video connector Connects an external monitor. For more information, see "Using the Display." serial connector Connects serial devices, such as a mouse or handheld device. AC adapter connector — Attach an AC adapter to the computer. The AC adapter converts AC power to the DC power required by the computer. You can connect the AC adapter with your computer turned either on or off. CAUTION: The AC adapter works with electrical outlets worldwide.
1 memory module cover 5 docking device slot 2 battery-bay latch release 6 fan 3 battery charge gauge 7 modem/coin-cell battery cover 4 battery 8 hard drive memory module cover — Covers the compartment that contains the memory module(s). See "Adding and Replacing Parts." battery-bay latch release — Releases the battery. See Using a Battery for instructions. battery charge gauge — Provides information on the battery charge. See Using a Battery.
Back to Contents Page Appendix Dell™ Latitude™ D610 User's Guide Macrovision Product Notice FCC Notices (U.S. Only) Macrovision Product Notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Back to Contents Page Alert Standard Format (ASF) Dell™ Latitude™ D610 User's Guide Alert Standard Format (ASF) is a Distributed Management Task Force (DMTF) management standard that specifies "pre-operating system" or "operating system absent" alerting techniques. The standard is designed to generate an alert on potential security and fault conditions when the operating system is in a sleep state or the system is turned off.
Back to Contents Page Using a Battery Dell™ Latitude™ D610 User's Guide Battery Performance Configuring Power Management Settings Checking the Battery Charge Charging the Battery Conserving Battery Power Replacing the Battery Power Management Modes Storing a Battery Battery Performance NOTE: For information about the Dell warranty for your computer, see the Product Information Guide or separate paper warranty document that shipped with your computer.
If the computer is connected to an electrical outlet, a icon appears. Charge Gauge By either pressing once or pressing and holding the status button on the charge gauge on the battery, you can check: l Battery charge (check by pressing and releasing the status button) l Battery health (check by pressing and holding the status button) The battery operating time is largely determined by the number of times it is charged.
or l Depending on how you set the power management options in the Power Options Properties window or the QuickSet Power Management Wizard, use one of the following methods: ¡ Press the power button. ¡ Close the display. ¡ Press . To exit standby mode, press the power button or open the display depending on how you set the power management options. You cannot make the computer exit standby mode by pressing a key or touching the touch pad or track stick.
Replacing the Battery CAUTION: Before performing these procedures, turn off the computer, disconnect the AC adapter from the electrical outlet and the computer, disconnect the modem from the wall connector and computer, and remove any other external cables from the computer. NOTICE: You must remove all external cables from the computer to avoid possible connector damage. CAUTION: Using an incompatible battery may increase the risk of fire or explosion.
Back to Contents Page Using the Module Bay Dell™ Latitude™ D610 User's Guide About the Module Bay About the Device Security Screw Removing and Installing Devices While the Computer Is Turned Off Removing and Installing Devices While the Computer Is Running About the Module Bay CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
3. Pull the device out of the module bay. 4. Push the new device into the bay until it clicks. Removing and Installing Devices While the Computer Is Running NOTICE: If the device security screw is installed, you must turn off the computer before removing the screw. 1. Before ejecting the device, double-click the Safely Remove Hardware icon on the taskbar, click the device you want to eject, and click Stop.
4. Push the new device into the bay until it clicks. The operating system automatically recognizes the device. 5. If necessary, enter your password to unlock your computer.
Back to Contents Page Using CDs, DVDs, and Other Multimedia Dell™ Latitude™ D610 User's Guide Playing a CD or DVD Adjusting the Volume Adjusting the Picture Connecting Your Computer to a TV or Audio Device Playing a CD or DVD NOTICE: Do not press down on the CD or DVD tray when you open or close it. Keep the tray closed when you are not using the drive. NOTICE: Do not move the computer when you are playing CDs or DVDs. 1. Press the eject button on the front of the drive. 2. Pull the tray out. 3.
1 volume icon 2 Volume Meter 3 mute icon When the meter is enabled, adjust the volume with the volume control buttons or by pressing the following keys: l Press to increase volume. l Press to decrease volume. l Press to mute volume. For more information about QuickSet, right-click the icon in the taskbar and click Help.
When you finish connecting the video and audio cables between your computer and your TV, you must enable your computer to work with the TV. See "Enabling the Display Settings for a TV in Microsoft® Windows® XP" to ensure that the computer recognizes and works properly with the TV. S-Video and Standard Audio 1 standard S-video cable 2 standard audio cable 1. Turn off the computer and the TV and/or audio device that you want to connect.
1 standard S-video to composite video adapter 2 composite video cable 3 standard audio cable 1. Turn off the computer and the TV and/or audio device that you want to connect. 2. Connect the standard video to composite video adapter cable to the S-video TV-out connector on the computer. 3. Plug one end of the composite video cable in to the composite video-input connector on the standard video to composite video cable. 4.
4. Click the DVD option. 5. Click the DVD Audio Setting icon. 6. Click the arrows beside the Speaker Configuration setting to scroll through the options, and select the SPDIF option. 7. Click the Back button once, and then click the Back button again to return to the main menu screen. Enabling S/PDIF in the Windows Audio Driver NOTE: Enabling S/PDIF in Windows disables the sound from the headphone connector. 1. Double-click the speaker icon in the Windows notification area. 2.
5. Click the DVD Audio Setting icon. 6. Click the arrows beside the Speaker Configuration setting to scroll through the options, and select the Headphones option. 7. Click the arrows beside the Audio listening mode setting to scroll through the options, and select the CL Headphone option. 8. Click the arrows beside the Dynamic range compression option to select the most suitable option. 9. Click the Back button once, and then click the Back button again to return to the main menu screen.
8. 9. If you want to use a TV and the computer display at the same time: a. In the new window, click Intel (R) Dual Display Clone and ensure that one of the devices listed is a TV. b. Click Device Settings. c. In the new window, ensure that the display resolution settings are correct. Click Apply to view the new settings. 10. Click OK to confirm the settings change. 11. Click Yes to keep the new settings. 12. Click OK.
Back to Contents Page Cleaning Your Computer Dell™ Latitude™ D610 User's Guide Computer, Keyboard, and Display Floppy Drive CDs and DVDs CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. Computer, Keyboard, and Display CAUTION: Before you clean your computer, disconnect the computer from the electrical outlet and remove any installed batteries. Clean your computer with a soft cloth dampened with water.
Back to Contents Page Using the Dell Diagnostics Dell™ Latitude™ D610 User's Guide Dell Diagnostics CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. Dell Diagnostics When to Use the Dell Diagnostics If you experience a problem with your computer, perform the checks in "Solving Problems" and run the Dell Diagnostics before you contact Dell for technical assistance.
2. Shut down and restart the computer. When the DELL logo appears, press immediately. If you wait too long and the Windows logo appears, continue to wait until you see the Windows desktop. Then shut down your computer and try again. NOTE: The next steps change the boot sequence for one time only. On the next start-up, the computer boots according to the devices specified in system setup. 3. When the boot device list appears, highlight CD/DVD/CD-RW Drive and press . 4.
Back to Contents Page Using the Display Dell™ Latitude™ D610 User's Guide Adjusting Brightness Switching the Video Image Setting Display Resolution and Refresh Rate Dual Independent Display Mode Swapping Primary and Secondary Displays Adjusting Brightness When a Dell™ computer is running on battery power, you can conserve power by setting the brightness to the lowest comfortable setting by pressing and the up- or down-arrow key on the keyboard.
"extended desktop" mode). This mode allows you to use both screens independently and drag objects from one screen to the other, effectively doubling the amount of viewable work space. 1. Connect the external monitor, TV, or projector to the computer. 2. Under Pick a category, click Appearance and Themes. 3. Under Pick a task..., click the area you want to change, or under or pick a Control Panel icon, click Display. 4. In the Display Properties window, click the Settings tab.
Back to Contents Page Reinstalling Software Dell™ Latitude™ D610 User's Guide Drivers Resolving Software and Hardware Incompatibilities Using Microsoft® Windows® XP System Restore Reinstalling Microsoft® Windows® XP NOTE: The Drivers and Utilities CD and the Operating System CD are optional and may not ship with your computer. Drivers What Is a Driver? A driver is a program that controls a device such as a printer, mouse, or keyboard. All devices require a driver program.
3. Click System. 4. In the System Properties window, click the Hardware tab. 5. Click Device Manager. 6. Right-click the device for which the new driver was installed and click Properties. 7. Click the Drivers tab. 8. Click Roll Back Driver. If Device Driver Rollback does not resolve the problem, then use System Restore to return your computer to the operating state that existed before you installed the new driver.
9. 10. When the name of the appropriate driver appears, click Next. Click Finish and restart your computer. Resolving Software and Hardware Incompatibilities If a device is either not detected during the operating system setup or is detected but incorrectly configured, you can use the Hardware Troubleshooter to resolve the incompatibility: 1. Click the Start button and click Help and Support. 2. Type hardware troubleshooter in the Search field and click the arrow to start the search. 3.
Undoing the Last System Restore NOTICE: Before you undo the last system restore, save and close all open files and exit any open programs. Do not alter, open, or delete any files or programs until the system restoration is complete. 1. Click the Start button, point to All Programs® Accessories® System Tools, and then click System Restore. 2. Click Undo my last restoration and click Next. 3. Click Next. The System Restore screen appears and the computer restarts. 4.
1. Save and close any open files and exit any open programs. 2. Insert the Operating System CD. Click Exit if the Install Windows XP message appears. 3. Restart the computer. 4. Press immediately after the DELL™ logo appears. If the operating system logo appears, wait until you see the Windows desktop, and then shut down the computer and try again. 5. Press the arrow keys to select CD-ROM, and press . 6. When the Press any key to boot from CD message appears, press any key.
19. Reinstall the appropriate drivers with the Drivers and Utilities CD. 20. Reinstall your virus protection software. 21. Reinstall your programs. NOTE: To reinstall and activate your Microsoft Office or Microsoft Works Suite programs, you need the Product Key number located on the back of the Microsoft Office or Microsoft Works Suite CD sleeve.
Back to Contents Page Finding Information Dell™ Latitude™ D610 User's Guide NOTE: Some features or media may be optional and may not ship with your computer. Some features or media may not be available in certain countries. NOTE: Additional information may ship with your computer.
l l l l l l l l l Solutions — Troubleshooting hints and tips, articles from technicians, and online courses, frequently asked questions Community — Online discussion with other Dell customers Upgrades — Upgrade information for components, such as memory, the hard drive, and the operating system Customer Care — Contact information, service call and order status, warranty, and repair information Service and support — Service call status and support history, service contract, online discussions with technica
After you reinstall your operating system, use the Drivers and Utilities CD (ResourceCD) to reinstall drivers for the devices that came with your computer. Your operating system product key label is located on your computer. NOTE: The color of your CD varies based on the operating system you ordered.
Back to Contents Page Getting Help Dell™ Latitude™ D610 User's Guide Technical Assistance Problems With Your Order Product Information Returning Items for Warranty Repair or Credit Before You Call Contacting Dell Technical Assistance If you need help with a technical problem, Dell is ready to assist you. CAUTION: If you need to remove the computer covers, first disconnect the computer power and modem cables from all electrical outlets. 1. Complete the procedures in Solving Problems. 2.
apsupport@dell.com (Asian/Pacific countries only) support.jp.dell.com (Japan only) support.euro.dell.com (Europe only) l Electronic Quote Service apmarketing@dell.com (Asian/Pacific countries only) sales_canada@dell.com (Canada only) AutoTech Service Dell's automated technical support service—AutoTech—provides recorded answers to the questions most frequently asked by Dell customers about their portable and desktop computers.
Before You Call NOTE: Have your Express Service Code ready when you call. The code helps Dell's automated-support telephone system direct your call more efficiently. Remember to fill out the Diagnostics Checklist. If possible, turn on your computer before you call Dell for technical assistance and call from a telephone at or near the computer.
Hardware And Warranty Support Services Sales Aruba Australia (Sydney) International Access Code: 0011 General Support toll-free: 0-800-444-0724 0-810-444-3355 toll-free: 800-1578 Website: support.ap.dell.com E-mail: support.ap.dell.com/contactus Country Code: 61 City Code: 2 General Support 13DELL-133355 Website: support.euro.dell.com E-mail: tech_support_central_europe@dell.
Hardware and Warranty Support E-mail: cn_support@dell.com Customer Care E-mail: customer_cn@dell.
Country Code: 33 Fax Fax (calls from outside of France) City Codes: (1) (4) 0825 004 701 04 99 75 40 01 Corporate Hardware and Warranty Support Customer Care 0825 004 719 0825 338 339 Switchboard 01 55 94 71 00 Sales 01 55 94 71 00 Fax 01 55 94 71 01 Website: support.euro.dell.com E-mail: tech_support_central_europe@dell.
Website: support.euro.dell.com Home and Small Business Italy (Milan) International Access Code: 00 Country Code: 39 City Code: 02 Hardware and Warranty Support 02 577 826 90 Customer Care 02 696 821 14 Fax 02 696 821 13 Switchboard 02 696 821 12 Corporate Hardware and Warranty Support 02 577 826 90 Customer Care 02 577 825 55 Fax 02 575 035 30 Switchboard Jamaica General Support (dial from within Jamaica only) 02 577 821 1-800-682-3639 Website: support.jp.dell.
Country Code: 60 Hardware And Warranty Support (PowerApp, PowerEdge, PowerConnect, and PowerVault) Customer Care toll-free: 1800 881 386 toll-free: 1800 881 306 (option 6) City Code: 4 Transaction Sales toll-free: 1 800 888 202 Corporate Sales toll-free: 1 800 888 213 001-877-384-8979 Customer Hardware And Warranty Support or 001-877-269-3383 50-81-8800 Mexico Sales or 01-800-888-3355 International Access Code: 00 001-877-384-8979 Country Code: 52 Customer Service or 001-877-269-3383 50-81-8800 Ma
St. Vincent and the Grenadines General Support toll-free: 1-877-270-4609 Website: support.ap.dell.
Taiwan International Access Code: 002 Hardware and Warranty Support (OptiPlex, Latitude, Inspiron, Dimension, and Electronics and Accessories) Hardware and Warranty Support (PowerApp, PowerEdge, PowerConnect, and PowerVault) Country Code: 886 toll-free: 00801 86 1011 toll-free: 00801 60 1256 Customer Care toll-free: 00801 60 1250 (option 5) Transaction Sales toll-free: 00801 65 1228 Corporate Sales toll-free: 00801 651 227 Website: support.ap.dell.
toll-free: 1-877-DELLTTY Dell Services for the Deaf, Hard-of-Hearing, or Speech-Impaired (1-877-335-5889) U.S.
Back to Contents Page Glossary Dell™ Latitude™ D610 User's Guide Terms in this Glossary are provided for informational purposes only and may or may not describe features included with your particular computer. A AC — alternating current — The form of electricity that powers your computer when you plug the AC adapter power cable in to an electrical outlet.
CD — compact disc — An optical form of storage media, typically used for audio and software programs. CD drive — A drive that uses optical technology to read data from CDs. CD player — The software used to play music CDs. The CD player displays a window with buttons that you use to play a CD. CD-R — CD recordable — A recordable version of a CD. Data can be recorded only once onto a CD-R. Once recorded, the data cannot be erased or written over. CD-RW — CD rewritable — A rewritable version of a CD.
E ECC — error checking and correction — A type of memory that includes special circuitry for testing the accuracy of data as it passes in and out of memory. ECP — extended capabilities port — A parallel connector design that provides improved bidirectional data transmission. Similar to EPP, ECP uses direct memory access to transfer data and often improves performance. EIDE — enhanced integrated device electronics — An improved version of the IDE interface for hard drives and CD drives.
HTTP — hypertext transfer protocol — A protocol for exchanging files between computers connected to the Internet. Hz — hertz — A unit of frequency measurement that equals 1 cycle per second. Computers and electronic devices are often measured in kilohertz (kHz), megahertz (MHz), gigahertz (GHz), or terahertz (THz). I IC — Industry Canada — The Canadian regulatory body responsible for regulating emissions from electronic equipment, much as the FCC does in the United States.
memory mapping — The process by which the computer assigns memory addresses to physical locations at start-up. Devices and software can then identify information that the processor can access. memory module — A small circuit board containing memory chips, which connects to the system board. MHz — megahertz — A measure of frequency that equals 1 million cycles per second. The speeds for computer processors, buses, and interfaces are often measured in MHz.
PS/2 — personal system/2 — A type of connector for attaching a PS/2-compatible keyboard, mouse, or keypad. PXE — pre-boot execution environment — A WfM (Wired for Management) standard that allows networked computers that do not have an operating system to be configured and started remotely. R RAID — redundant array of independent disks — A method of providing data redundancy. Some common implementations of RAID include RAID 0, RAID 1, RAID 5, RAID 10, and RAID 50.
The number of colors and resolution that a program displays depends on the capabilities of the monitor, the video controller and its drivers, and the amount of video memory installed in the computer. S-video TV-out — A connector used to attach a TV or digital audio device to the computer. SXGA — super-extended graphics array — A video standard for video adapters and controllers that supports resolutions up to 1280 x 1024.
wallpaper — The background pattern or picture on the Windows desktop. Change your wallpaper through the Windows Control Panel. You can also scan in your favorite picture and make it wallpaper. write-protected — Files or media that cannot be changed. Use write-protection when you want to protect data from being changed or destroyed. To writeprotect a 3.5-inch floppy, slide its write-protect tab to the open position.
Back to Contents Page Using the Keyboard and Touch Pad Dell™ Latitude™ D610 User's Guide Numeric Keypad Key Combinations Touch Pad Changing the Track Stick Cap Numeric Keypad The numeric keypad functions like the numeric keypad on an external keyboard. Each key on the keypad has multiple functions. The keypad numbers and symbols are marked in blue on the right of the keypad keys. To type a number or symbol, hold down and press the desired key. l To enable the keypad, press .
Radios (Including Wireless Networking and Bluetooth® Wireless Technology) Enables and disables radios, including wireless networking and Bluetooth wireless technology Power Management Activates a power management mode. You can reprogram this keyboard shortcut to activate a different power management mode using the Advanced tab in the Power Options Properties window. Places your computer in hibernation.
l l To select and move (or drag) an object, position the cursor on the object and tap twice on the touch pad. On the second tap, leave your finger on the touch pad and move the selected object by sliding your finger over the surface. To double-click an object, position the cursor on the object and tap twice on the touch pad or use your thumb to press the left touch-pad button twice. You can also use the track stick to move the cursor.
Back to Contents Page Passwords Dell™ Latitude™ D610 User's Guide About Passwords Using a Primary Password Using an Administrator Password Using a Hard Drive Password About Asset Tags Enabling Trusted Platform Module (TPM) About Passwords NOTE: Passwords are disabled when you receive your computer. A primary password, an administrator password, and a hard drive password all prevent unauthorized access to your computer in different ways.
To set or change administrator passwords, access User Accounts from the Control Panel. When you set an administrator password, the Configure Setup option becomes available in system setup. The Configure Setup option allows you to restrict access to system setup in the same way that a primary password restricts access to the computer. The administrator password can be used instead of the primary password. Whenever you are prompted to enter the primary password, you can enter the administrator password.
If the operating system logo appears, wait until you see the Microsoft® Windows® desktop, and then shut down the computer and try again. c. 2. Press the arrow keys to select Diskette Drive and press . Type asset and a space followed by the new asset tag, and press . For example, type the following command line and press : asset 1234$ABCD& NOTE: An asset tag can have up to 10 characters; any combination of characters excluding spaces is valid. 3.
To use one of the asset tag options (see the following table): 1. Boot the computer using the bootable floppy disk you created in "Using the Dell™ Portables Asset Tag Utility." 2. Type asset and a space followed by the option, and then press .
7. Initialize the TPM owner and user passwords: a. Boot your computer to the Microsoft® Windows® operating system. b. Click Start® Programs® Broadcom Security Platforms Tools. Then, click the icon for the Security Platform Initialization Wizard. c. Follow the instructions for creating the TPM owner, user passwords, and credentials.
Back to Contents Page Using PC Cards Dell™ Latitude™ D610 User's Guide PC Card Types PC Card Blanks Extended PC Cards Installing a PC Card Removing a PC Card or Blank PC Card Types See "Specifications" for information on supported PC Cards. NOTE: A PC Card is not a bootable device. The PC Card slot has one connector that supports a single Type I or Type II card. The PC Card slot supports CardBus technology and extended PC Cards. "Type" of card refers to its thickness, not its functionality.
The computer recognizes most PC Cards and automatically loads the appropriate device driver. If the configuration program tells you to load the manufacturer's drivers, use the floppy or CD that came with the PC Card. Removing a PC Card or Blank NOTICE: Use the PC Card configuration utility (click the icon in the taskbar) to select a card and stop it from functioning before you remove it from the computer. If you do not stop the card in the configuration utility, you could lose data.
Back to Contents Page Dell™ QuickSet Dell™ Latitude™ D610 User's Guide NOTE: This feature may not be available on your computer. Dell™ QuickSet provides you with easy access to configure or view the following types of settings: l Network connectivity l Power management l Display l System information Depending on what you want to do in Dell™ QuickSet, you can start it by either clicking, double-clicking, or right-clicking the QuickSet icon, Microsoft® Windows® taskbar.
Back to Contents Page Adding and Replacing Parts Dell™ Latitude™ D610 User's Guide Before You Begin Hard Drive Memory Keyboard Modem Internal Card With Bluetooth® Wireless Technology Mini PCI Card Coin-Cell Battery Before You Begin This chapter provides procedures for removing and installing the components in your computer.
2. Turn off your computer. 3. If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions. NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack. 4. Disconnect any telephone or network cables from the computer. 5. Close the display and turn the computer upside down on a flat work surface.
3. If you are replacing a memory module, ground yourself and remove the existing module: a. Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up. b. Remove the module from the connector. 1 securing clips (2 per connector) 2 memory module NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector labeled "DIMMA" before you install a module in the connector labeled "DIMMB.
NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory-module securing clips. 3. If you are replacing a memory module, ground yourself and remove the existing module: a. Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up. b. Remove the module from the connector.
1. Follow the procedures in "Before You Begin." 2. Turn the computer over and release the captive screw from the modem cover. 1 captive screw 3. Place your finger under the cover at the indentation and lift the cover open. 1 screw 2 modem 3 coin-cell battery 4. 5. If a modem is not already installed, go to step 5. If you are replacing a modem, remove the existing modem: a. Remove the screw that secures the modem to the system board, and set the screw aside. b.
Mini PCI Card If you ordered a Mini PCI card with your computer, the card is already installed. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. 1. Follow the procedures in "Before You Begin." 2. Remove the keyboard. 1 Mini PCI card 2 antenna wires (2) 3. If a Mini PCI card is not already installed, go to step 4. If you are replacing a Mini PCI card, remove the existing card: a.
1 Mini PCI card 2 metal securing tabs (2) 4. Align the Mini PCI card with the connector at a 45-degree angle, and press the Mini PCI card into the connector until you feel a click. 1 Mini PCI card 2 antenna wires (2) NOTICE: To avoid damaging the Mini PCI card, never place cables on top of or under the card. 5. Connect the antenna cables to the Mini PCI card. 6. Replace the cover and screws.
NOTICE: Hard drives are extremely fragile; even a slight bump can damage the drive. NOTE: Dell does not guarantee compatibility or provide support for hard drives from sources other than Dell. To replace the hard drive in the hard drive bay: 1. Follow the procedures in "Before You Begin." 1 screws (2) 2 hard drive 2. Turn the computer over, and remove the hard drive screws. NOTICE: When the hard drive is not in the computer, store it in protective antistatic packaging.
1 display 2 center control cover 3 computer base 3. 1 Remove the center control cover: a. Open the display all the way (180 degrees) so that it lies flat against your work surface. b. Starting on the right side of the computer, use a plastic scribe to pry up the center control cover. Lift it away from the computer, and lay it aside. center control cover 4. Remove the keyboard: a. Remove the two M2.5 x 6-mm screws across the top of the keyboard.
1 M2.5 x 6-mm screws (2) 2 keyboard connector pull-tab 3 keyboard tabs 4 palm rest Internal Card With Bluetooth® Wireless Technology CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer.
CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer. NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer. 1. Follow the procedures in "Before You Begin." 2.
Back to Contents Page
Back to Contents Page Using the System Setup Program Dell™ Latitude™ D610 User's Guide Overview Viewing the System Setup Screens System Setup Screen Commonly Used Options Overview NOTE: Your operating system may automatically configure most of the options available in system setup, thus overriding options that you set through system setup. (An exception is the External Hot Key option, which you can disable or enable only through system setup.
l Diskette Drive l Modular Bay HDD l Internal HDD l CD/DVD/CD-RW Drive During the boot routine, the computer starts at the top of the list and scans each enabled device for the operating system start-up files. When the computer finds the files, it stops searching and starts the operating system. To control the boot devices, select (highlight) a device by pressing the down-arrow or up-arrow key, and then enable or disable the device or change its order in the list.
Back to Contents Page Using Smart Cards Dell™ Latitude™ D610 User's Guide About Smart Cards Installing a Smart Card NOTE: This feature may not be available on your computer. About Smart Cards Smart cards are portable credit-card shaped devices with internal integrated circuits. The top surface of the smart card usually contains an embedded processor located under the gold contact pad.
Back to Contents Page Solving Problems Dell™ Latitude™ D610 User's Guide Dell Technical Update Service Network Problems Dell Support Utility PC Card Problems Drive Problems Power Problems E-Mail, Modem, and Internet Problems Printer Problems Error Messages Scanner Problems IEEE 1394 Device Problems Sound and Speaker Problems Keyboard Problems Touch Pad or Mouse Problems Lockups and Software Problems Video and Display Problems Memory Problems Dell Technical Update Service The Dell Technical
Double-click the icon to manually check your computing environment, view frequently asked questions, access the help file for the Dell Support Utility, and view Dell Support settings. For more information about the Dell Support Utility, click the question mark (?) at the top of the Dell Support screen. Drive Problems CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
l l Ensure that the sound is not caused by the program that is running. Ensure that the disk or disc is inserted properly. Hard drive problems Allow the computer to cool before turning it on — A hot hard drive may prevent the operating system from starting. Try allowing the computer to return to room temperature before turning it on. Run Check Disk — 1. 2. 3. 4. 5. 6. 7. Click the Start button and click My Computer. Right-click Local Disk C:. Click Properties. Click the Tools tab.
Ensure that you are connected to the Internet — Ensure that you have subscribed to an Internet provider. With the Outlook Express email program open, click File. If Work Offline has a checkmark next to it, click the checkmark to remove it and connect to the Internet. For help, contact your Internet service provider.
persists, try another drive. Run the Hard-Disk Drive tests as described in "Using the Dell Diagnostics." Hard-disk drive read failure — The hard drive may be defective. Shut down the computer, remove the hard drive, and boot the computer from a CD. Then shut down the computer, reinstall the hard drive, and restart the computer. If the problem persists, try another drive. Run the Hard-Disk Drive tests as described in "Using the Dell Diagnostics.
4. 5. Click Remove or Change/Remove and follow the prompts on the screen. See the program documentation for installation instructions. Sector not found — The operating system cannot locate a sector on the hard drive. You may have a defective sector or corrupted FAT on the hard drive. Run the Windows error-checking utility to check the file structure on the hard drive. See the Help and Support Center for instructions.
Fill out the Diagnostics Checklist as you perform the various checks. NOTE: Use the integrated keyboard when working in MS-DOS® mode or when running the Dell Diagnostics or the system setup program. When you attach an external keyboard, the integrated keyboard remains fully functional. External keyboard problems Check the keyboard cable — Shut down the computer. Disconnect the keyboard cable and check it for damage, and firmly reconnect the cable.
End the program — 1. 2. 3. 4. Press simultaneously. Click Applications. Click the program that is no longer responding. Click End Task. A program crashes repeatedly NOTE: Software usually includes installation instructions in its documentation or on a floppy or CD. Check the software documentation — If necessary, uninstall and then reinstall the program.
Memory Problems Fill out the Diagnostics Checklist as you complete these checks. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. If you receive an insufficient memory message — l l l l Save and close any open files and exit any open programs you are not using to see if that resolves the problem. See the software documentation for minimum memory requirements. If necessary, install additional memory.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. Check the power light — When the power light is lit or blinking, the computer has power. If the power light is blinking, the computer is in standby mode—press the power button to exit standby mode. If the light is off, press the power button to turn on the computer. Charge the battery — The battery charge may be depleted. 1. 2. 3. Reinstall the battery.
If a computer loses AC power while docked to the Dell D/Dock or Dell D/Port, the computer immediately goes into low-performance mode. Printer Problems Fill out the Diagnostics Checklist as you complete these checks. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTE: If you need technical assistance for your printer, contact the printer's manufacturer.
If your scanner is listed, Windows recognizes the scanner. Reinstall the scanner driver — See the scanner documentation for instructions. Sound and Speaker Problems NOTE: This computer uses digital sound, and contains no analog audio lines. PCMCIA cards such as modems that use analog lines to produce sound will not function. Fill out the Diagnostics Checklist as you complete these checks.
Touch Pad or Mouse Problems Check the touch pad settings — 1. 2. 3. Click the Start button, click Control Panel, and then click Printers and Other Hardware. Click Mouse. Try adjusting the settings. Check the mouse cable — Shut down the computer. Disconnect the mouse cable, check it for damage, and firmly reconnect the cable. If you are using a mouse extension cable, disconnect it and connect the mouse directly to the computer. To verify that the problem is with the mouse, check the touch pad — 1. 2. 3.
Adjust the brightness — Press and the up- or down-arrow key. Move the external subwoofer away from the computer or monitor — If your external speaker system includes a subwoofer, ensure that the subwoofer is at least 60 cm (2 ft) away from the computer or external monitor. Eliminate possible interference — Turn off nearby fans, fluorescent lights, halogen lamps, or other appliances. Rotate the computer to face a different direction — Eliminate sunlight glare, which can cause poor picture quality.
Back to Contents Page Specifications Dell™ Latitude™ D610 User's Guide Processor Processor type Intel® Pentium® M L1 cache 32-KB instruction and 32-KB write-back data cache L2 cache 2 MB External bus frequency 533 MHz System Information System chipset Intel 915GM (integrated video), ICH60M, or Intel 915PM (discrete video), ICH60M Processor Side Data bus width 64 bits DRAM bus width DDR2 dual channel 400 MHz/533 MHz (independent 64-bit memory data channels) Processor address bus width 32 bit
Communications Modem: Type v.92 56K MDC (optional) Controller softmodem Interface internal AC'97 bus Network adapter 10/100/1000 Ethernet LAN on system board Wireless internal Mini PCI Wi-Fi (802.11b, 802.11b/g, or 802.11a/b/g) and Bluetooth® wireless technology (optional) Video NOTE: Your Dell™ Latitude™ D610 computer has both integrated and discrete video options.
SXGA+ Operating angle 1400 x 1050 at 262,000 colors 0º (closed) to 180° Viewing angles: Horizontal ±40° Vertical +10°/–30° Pixel pitch: XGA 0.28 mm (12.1 inch); 0.297 mm (14.1 inch) SXGA+ 0.204 mm (14.1 inch) Power consumption (panel with backlight) (maximum): XGA 6.0 W SXGA+ 6.5 W Controls brightness can be controlled through keyboard shortcuts Keyboard Number of keys 87 (U.S.
NOTE: The 90-W AC adapter is optional and may not ship with your computer. Types 90 W and 65 W Input voltage 90–264 VAC (both) Input current (maximum) 1.7 A (both) Input frequency 47–63 Hz (both) Output current: 90 W 5.62 A (maximum at 4-second pulse); 4.62 A (continuous) 65 W 4.34 A (maximum at 4-second pulse); 3.34 A (continuous) Output power 90 W or 65 W Rated output voltage 19.5 VDC (both) Dimensions: Height 33.8–34.6 mm (1.34–1.36 inches) (90 W) 27.8–28.6 mm (1.10–1.
Back to Contents Page Dell™ Latitude™ D610 User's Guide Click the links to the left for information on the features and operation of your computer. For information on other documentation included with your computer, see "Finding Information." NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
Back to Contents Page Travelling With Your Computer Dell™ Latitude™ D610 User's Guide Identifying Your Computer Packing the Computer Travel Tips Identifying Your Computer l Attach a name tag or business card to the computer. l Write down your Service Tag and store it in a safe place away from the computer or carrying case. Use the Service Tag if you need to report a loss or theft to law enforcement officials and to Dell. l Create a file on the Microsoft® Windows® desktop called if_found.
l Before you use the computer on an airplane, verify that such usage is permitted. Some airlines forbid the use of electronic devices during the flight. All airlines forbid the use of electronic devices during takeoff and landing. If Your Computer Is Lost or Stolen l Call a law enforcement agency to report the lost or stolen computer. Include the Service Tag in your description of the computer.
Back to Contents Page Wireless Local Area Network Dell™ Latitude™ D610 User's Guide Overview Connecting to a Wireless Local Area Network Overview A WLAN is a series of interconnected computers that communicate with each other over the air waves rather than through a network cable connected to each computer. In a WLAN, a radio communications device called an access point or wireless router connects network computers and provides Internet, or network, access.
1. Contact your Internet service provider (ISP) to obtain specific information about the connection requirements for your broadband modem. 2. Ensure that you have wired Internet access through your broadband modem before you attempt to set up a wireless Internet connection. 3. Install any software required for your wireless router. Your wireless router may have been shipped with an installation CD. Installation CDs usually contain installation and troubleshooting information.
2. Double-click Network Connections. 3. Right-click the Wireless Network Connection icon, and then click View Available Wireless Networks. If the Choose a wireless network window states Windows cannot configure this connection, the wireless network card's client utility is managing the wireless network card.
Back to Contents Page Using Microsoft® Windows® XP Dell™ Latitude™ D610 User's Guide Help and Support Center User Accounts and Fast User Switching Microsoft® Windows® Classic View Setting Up a Home and Office Network Desktop Cleanup Wizard Network Setup Wizard Transferring Information to a New Computer Internet Connection Firewall Help and Support Center NOTE: The Microsoft® Windows® XP Home Edition and Windows XP Professional operating systems have different features and appearances.
Desktop Cleanup Wizard Your computer is set up to use the Desktop Cleanup Wizard to move programs that are not frequently used to a designated folder 7 days after you first start your computer and every 60 days after that. The appearance of the Start menu changes as programs are moved. To turn off the Desktop Cleanup Wizard, perform the following steps. NOTE: You can run the Desktop Cleanup Wizard any time by clicking Clean Desktop Now under Run Desktop Cleanup Wizard every 60 days. 1.
5. On the Which computer is this? screen, click Old Computer and click Next. 6. On the Select a transfer method screen, click the transfer method you prefer. 7. On the What do you want to transfer? screen, select the items you want to transfer and click Next. After the information has been copied, the Completing the Collection Phase screen appears. 8. Click Finish. To transfer data to the new computer: 1. On the Now go to your old computer screen on the new computer, click Next. 2.
1. Connect the network cable to the network adapter connector on the back of your computer. NOTE: Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure. 2. Connect the other end of the network cable to a network connection device, such as a network wall connector. NOTE: Do not use a network cable with a telephone wall connector.
