Datasheet

Dell PowerEdge T20 Technical Guide 5
Processors Intel Xeon processor E3-1200
product family
Intel Xeon processor E3-
1200v3 product family,
Intel Pentium processors
Front side bus (FSB) DMI II (Direct Media Interface) Intel Direct Media Interface
Memory Up to 32GB (4 DIMMs):
1GB/2GB/4GB/8GB DDR3 up to
1600MT/s
Up to 32GB (4 UDIMM)
2GB/4GB/8GB unbuffered
1600MT/s ECC
Hard drive bays Up to 4 3.5" SATA/SAS (cabled) hard
drives or 6 x 2.5”
Up to 6 internal (cabled)
hard drives total:
• Up to four 3.5” SATA
hard drives, plus
• Up to two 2.5” SATA hard
drives (require expansion
kits) with optional
controller card
SATA ports/speed
(on-board)
5 ports; 5x3Gbps 4 ports; 2x6Gbps; 2x3Gbps
PCIe & PCI slots 1x16 (x8, 3.0)
1x8 (x8, 3.0)
1x8 (x4, 2.0)
1x4 (x1, 2.0)
1x16 (x16, PCIe 3.0)
1x16 (x4, PCIe 2.0)
1x1 (x1, PCIe 2.0)
1 PCI slot
USB 2 (front), 4 (rear) 2.0 2 (front), 4 (rear) 2.0
2 (front), 2 (rear) 3.0
Internal USB 2 (type-A adapter) 2 (10-pin)
LAN on motherboard
(LOM)
1 port 1 port
Power supplies 305W 80+ 290W
Systems management Basic management Intel Active Management
Technology (AMT) 9.0
(with Intel Xeon processors)
Software RAID PERC S100 Intel Rapid Storage
Controller 12.0
PowerEdge T20 base fixed configurations
The PowerEdge T20 offers three fixed configurations with options that enable you to tailor your T20
to best suit your needs. Contact your Dell service representative to:
• Install additional memory and hard drives.
• Add an operating system or application software.
• Add external devices, such as laptops, desktop PCs, printers and projectors.
• Add deployment services to get you up and running.
• Get support services to keep you running smoothly over time.
Table 3 outlines the three base fixed configurations on the T20 as well as additional options.