Hardware manual

Group Administration Group members

6–4

Connections tab

1. Click Group, then expand Members.

2. Select the member name, and

click the Connections tab.

The iSCSI Connection panel displays details of the current

initiator connections. See the online help for

information about the data fields and options. See also Monitoring iSCSI connections on page 1

5-3.

Service tab

1. Click Group, then expand Members.

2. Select the member name, and

click the Service tab.

The following panels provide information about the member

’s hardware components:

• Component versions panel – Provides information that enables yo

u to identify your array and its components

for the purpose of service and upgrades, including installed firmware revisions.

• Disk versions panel – Provides information that enables you to identi

fy disk drives for the purpose of service

and upgrades, including installed firmware revisions.

You can also restart or shut down a member from this panel, as described in Restarting a mem

ber on page 6-15 and

Shutting down a member on

page 6-14

See the online help for information about the data fields and options. See also Displaying me

mber service

information.

Member RAID policies

PS Series arrays protect data by using RAID technology and spare drives. After you add a member to a PS Series

group, you choose the RAID policy for that member.

To display current RAID policies, click

Members in the far-left panel. The Group Members panel shows the RAID

policy for each member.

Supported RAID policies are:

• RAID 10

• RAID 10 no spares

• RAID 50

• RAID 50 no spares

• RAID 5

• RAID 6

• RAID 6 no spares

• RAID 6 Accelerated (supported only on array models with disk drive configurations that include solid-state

ives and hard disk drives.)