Hardware manual

Group Administration Group security
4–18
Unconfiguring a management network
You can unconfigure a dedicated management network and re-enable the group IP address to be used for group
management.
1. Click
Group, then Group Configuration, and then the Advanced tab.
2. In the Group Advanced window’s Dedicated Management Network panel, click
Configure management
network
.
3. In the Configure Management Network dialog box, deselect
Enable dedicated management network.
4. Click
OK to confirm that you want to perform the operation. The Group Manager GUI automatically restarts,
using the group IP address.
5. Log in to the group.
6. For each member:
a. Disconnect the former management interface from the management network.
b. If the interface is eligible
for iSCSI traf
fic and you want to use it, connect it to the iSCSI network.
c. Click
Members, then the member name, and then the Network tab.
d. Select the former management interface and click
Modify IP settings.
e. In the Modify IP settings dialog box, if you do not want to use the interface, delete the IP address and click
OK.
If you want to use the interface, do the following:
• Change the IP address and subnet mask to the iSCSI
network.
• Deselect
Restrict to management access.
• Select Enable this interface.
• Click
OK.
7. To log in to and manage the group, connect to the group IP address.