Hardware manual

Group Administration Group security
4–11
• Number of retries value
1. Click
Group, then Group Configuration, and then the Administration tab.
2. In the RADIUS Authentication panel, click RADIUS settings.
3. To change a server IP address or password, s
elect the server IP address and click Modify in the RADIUS
settings dialog box. Change the settings and click
OK.
4. Click
OK.
Deleting a RADIUS server connection
1. Click Group, then Group Configuration, and then the Administration tab.
2. In the RADIUS Authentication panel, click
RADIUS settings. The RADIUS settings dialog box appears.
3. Select the server IP address and click
Delete.
4. In the Group Administration window, click
Save all changes (Control+S).
Disabling use of a RADIUS server in a Group
If you previously configured the use of a RADIUS authentication server or a RADIUS accounting server, you can
disable use of the server.
1. In the Group Administration window, deselect
Enable RADIUS authentication for login or deselect
Enable RADIUS accounting for authenticated users
.
2. Click
Save all changes (Control+S).
Displaying and configuring SNMP access to a Group
You can use Simple Network Management Protocol (SNMP) for read-only access to a PS Series group through one
or more read-only community names.
Note: SAN HeadQuarters requires you to configure SNMP
access to a group. The Manual Transfer Utility
requires you to configure SNMP access and specify
public for the SNMP community name.
To display SNMP Access:
1. Click
Group, then Group Configuration.
2. Select the
SNMP tab.
See the online help for information about the data fields and options.