Hardware manual

Group Administration Group monitoring
15–7
You can take the following actions:
• Click a volume name to navigate to the V
olumes Status window.
• Double-click a row to navigate to the Outbound Replicas window.
Table 15-4 shows the outbound replication operation status. The
first column lists the status values, the second
column provides descriptions, and the third column provides
solutions.
Table 15-4: Outbound Replication Operation Status
Status Description Solution
authfailure Failed authentication between the
repl
ication partners.
Make sure you configured the partners
with the correct passwords.
cancelling Administrator cancelled the replication
operation.
None needed; informational
completed Most recent replication is complete. None needed; informational
disabled Administrator disabled replication for
th
e volume.
None needed; informational
failed Volume replication failed. Examine the event log for info
rmation
about the failure and correct the
problem.
inprogress Volume replication is in progress. None needed; informational
manual-transfer-in-progress Manual transfer is in progress. None needed; informational
partner-down Volume replication cannot continue
because
the partner is unavailable.
Make sure the network link between the
partners is configured correctly and
functioning.
partner-paused-inbound Partner administrator paused inbound
replication
.
None needed; informational
partner-paused-outbound Partner administrator paused outbound
replication
.
None needed; informational
pause-max-snaps-reached Replication paused because the
second
ary group contains the maximum
number of replicas or snapshots for a
group.
Delete replicas or snapshots on the
seco
ndary group.
paused Administrator paused replication to the
pa
rt
ner.
None needed; informational
paused-remote-reserve-low Replication paused because of
in
sufficient replica reserve.
On the primary group, increase the
replica reserve percentage. An event
message specifies the amount to which
the replica reserve must be increased for
the replication to complete. Replication
continues automatically.
paused-remote-resize-failed Replica reserve resize operation failed
due
to insuf
ficient delegated space.
On the secondary group, increase the
space delegated to the primary group.
ready Replication between the partners is
correctly configured and
is ready to
process new replication operations.
None needed; informational.
remote-disallow-downgrade-
not-set
Replication paused because the
secon
d
ary group did not disallow
firmware downgrades.
On the secondary group, disallow
do
wngrades.
remote-partner-needs-
upgrade
Replication paused because the
second
ary group is running incompatible
firmware.
Upgrade secondary group firmware to
t
he same firmware as the primary group.
Replication resumes automatically.