Hardware manual

Group Administration Group event logging
14–5
• To modify the IP address for an SMTP server, select the IP address, click Modify, change the address, and
click
OK.
• To delete an SMTP server, select the IP address and click
Delete.
3. Click
Save all changes (Control+S) to apply the changes.
Configuring syslog notification
Requirement: The syslog server must be able to store remote log files.
1. Click
Group, then Group Configuration.
2. Click the
Notifications tab. See the online help for information about the data fields and options in the
Event Logs panel.
3. In the Event Logs panel, select
Send events to syslog servers.
4. Under Syslog Servers, click
Add and specify an IP address for the syslog server. You can specify up to three
syslog servers. All the servers receive events.
5. Under Event Priorities, select the event priorities that resu
lt in syslog server notification. See About event
messages on pa
ge 14-1.
6. Click
Save all changes (Control+S).
Changing the syslog notification configuration
1. Click Group, then Group Configuration, and then the Notifications tab.
2. In the Event Logs panel:
• To disable syslog notification, deselect
Send events to syslog servers.
• To modify the IP address for a syslog server, select the IP address, click
Modify, change the address, and
click
OK.
• To delete a syslog server, select the IP address and click
Delete.
• To change the event priorities that result in notification, select the pri
orities.
3. Click Save all changes (Control+S) to apply the changes.
Enabling or disabling the display of INFO event messages
You can enable (default) or disable the display of informational messages in the Group Events window and on the
CLI console. However, the group continues to log these messages.
1. Click
Group, then Group Configuration, and then the Notifications tab.
2. In the Event Logs panel, select or deselect
Enable live informational messages.
3. Click
Save all changes (Control+S).