Hardware manual

Group Administration Basic volume operations
9–15
You cannot use the Group Manager GUI to enable or disable iSNS discovery for a volume or snapshot. Instead,
you must use the following CLI command formats:
volume select volume_name isns-discovery enable | disable
volume select volume_name snapshot select snapshot_name isns-discovery enable | disable
Deleting a volume
You can delete a volume. Space that the group allocated to the volume becomes part of free pool space.
Note: If you delete a volume, the group also de
letes its snapshots. However, the group does not delete any volume
replicas on the secondary group.
Requirement: Yo
u must set a volume offline before you delete it. The group closes any active iSCSI connections
to the volume.
Restriction: Yo
u cannot delete a template volume if it still has thin clones attached to it or if recovery thin clones
exist.
1. Click
Volumes in the lower-left panel, then expand Volumes in the far-left tree, then select the volume name,
and then click
Delete volume, Delete template, or Delete thin clone.
2. Confirm that you want to delete the volume and
its data.