Personal Computer User Manual

Back to Contents Page
 Replacing the Rubber Foot
DellStudio™540ServiceManual



1. Follow the procedures in Before You Begin.

2. Lay your computer on its side.

3. Pull the rubber foot until it comes free.

4. To replace the rubber foot, align and insert the rubber foot into the rubber foot slot at the bottom of the computer.

5. Press the rubber foot pin into the rubber foot to secure the rubber foot to the chassis.
Back to Contents Page

CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To guard against likelihood of electric shock, laceration by moving fan blades or other unexpected injuries, always unplug your
computer from the electrical outlet before removing the cover.
1
rubber foot pin
2
rubber foot
3
rubber foot slot

