Service manual

Adjustment and Troubleshooting
4-12
Service Manual
4.1.5 Clearing LCD Error Messages
Display Meaning Suggested solutions
ADC Error
ADC Not Confirm
Error
There is a problem in your printer
system.
Unplug the power cord and plug it back in.
Close Toner Door The top cover is not securely
latched.
Close the cover until it locks into place.
Close Rear Door The rear door is not securely
latched.
Close the door until it locks into place.
Close Bin1 Door The rear door of output expander is
not securely latched.
Close the door until it locks into place.
Close Fuser Door The fuser door is not securely
latched.
Open the rear door and close the fuser door until it
locks into place.
Tray [x] Open
Tray [x] Open
Close Tray [x]
The displayed tray is open. Close the tray until it locks into place.
HCF Open
HCF Open
Close Door
HCF(High Capcity Feeder) is open. Close the HCF until it locks into place.
Tray [x] Empty
Load [Size][Type]
There is no paper in the tray. Load paper in the tray.
HCF Empty
Load [Size][Type]
There is no paper in the HCF. Load paper in the HCF
MPF Empty
Load [Size][Type]
Press √ Select
There is no paper in the multi-
purpose feeder.
Load paper in the multi-purpose feeder.
Paper Mismatch/
Tray [x]/MPF
Load [Size][Type]
Continue √ ,
Cancel X
The paper size specified in the
printer properties does not match
the paper being loading.
Load the correct paper in the tray.
Paper Jam 0
Check Toner Cover
Paper has jammed around the
toner cartridge area.
Remove the jammed paper.
MP Tray
Check MPF Door
Paper has jammed in the feeding
area of the multi-purpose feeder.
Remove the jammed paper.
Paper Jam 0
Check Tray[x]
Paper has jammed in the feeding
area of the paper tray.
Remove the jammed paper.
Paper Jam 1
Open/Close Door
Paper has jammed in the paper exit
area or around the toner cartridge
area.
Remove the jammed paper.