Service manual

Disassembly and Reassembly
3-16
Service Manual
34. Remove the washer with any tool
(ex. tweezers). And remove the duplex gear.
35. Remove the 6 screws securing the
SHIELD-SMPS.
36. Remove the screw from the edge of
SHIELD-SMPS. And disassemble the
Holder-P-Damper and Damper-Pick Up.
SHIELD-SMPSSHIELD-SMPS
Holder-P-Damper
Damper-Pick Up
Holder-P-Damper
Damper-Pick Up
Duplex gear