Owner`s manual

Linking output bins

Linking output bins lets you create a single output source so the printer can automatically switch output to the next available bin. You can also set the output
type for media such as card stock or envelope sizes that cannot be sent to an optional output bin. For more information on the values available to configure
your output bins, see Understanding the Operator Panel Menus.

To link output bins:
1. Press the Menu button on the operator panel.
2. Press the Down arrow button until appears next to Paper Menu, and then press the Select button .
3. Press the Down arrow button until appears next to Bin Setup, and then press the Select button .
4. Press the Down arrow button until appears next to Configure Bins, and then press the Select button .
5. Press the Down arrow button until appears next to Link, and then press the Select button .
The printer returns to Ready.
NOTE: The bin sequence for linking always starts with the Standard Bin and proceeds from the bin nearest to the floor to the bin farthest from the floor.
Downloaded from ManualsPrinter.com Manuals