Datasheet

Document ID Number: 328209 003EN Intel
®
Xeon Phi™ Coprocessor Datasheet
43
3. Install OEM Bracket.
a. Insert the OEM bracket into the Intel
®
Xeon Phi™ coprocessor card assembly,
as shown in Figure 3-27.
b. Install (4) M3 x 6mm Flat Head Screws; torque = 6inch-lbs, shown in Figure 3-
28.
At this point, “clearance lid” units are ready to be mounted in the chassis.
Figure 3-27 OEM Bracket Installation
“Overlap Lid” Units “Clearance Lid” Units
Figure 3-28 OEM Bracket Installation
“Overlap Lid” Units
“Clearance Lid” Units