User Manual

GPU kit
The GPU FL and HL kits are available for the Customer. Depending on the kit ordered, the respective components are available.
CAUTION: Do not install GPUs, network cards, or other PCIe devices on your system that are not validated
and tested by Dell. Damage caused by unauthorized and invalidated hardware installation will null and void the
system warranty.
WARNING: Consumer-Grade GPU should not be installed or used in the Enterprise Server products.
Table 77. Components in the full length (FL) GPU kit
Components GPU FL GOLD kit GPU FL SLVR kit
Details Quantity Details Quantity
Risers Riser configuration 2-1,
3-1¹, or 4-1
3 x FL risers (R1A or
R1C, R4A) + 3 x HL
risers (R2A, R3A, or
R3B
#
)
Riser configuration 2-1,
3-1¹, or 4-1
3 x FL risers (R1A or
R1C, R4A) + 3x HL
risers (R2A, R3A, or
R3B
#
)
Shroud GPU shroud 1 GPU shroud 1
Fans GOLD HPR 6 SLVR HPR 6
Heat sinks T-type heat sink
for processor 1 and
processor 2
2 T-type heat sink
for processor 1 and
processor 2
2
Cables Power cable 2x (6+2)-pin power
cables, 2 x 8-pin power
cables
Power cable 2x (6+2)-pin power
cables, 2 x 8-pin power
cables
Foam Mylar foam 1 Mylar foam 1
FL - Full Length, HL - Half Length, HPR - High Performance, SLVR - Silver
NOTE:
#
The Riser R3B is shipped with the GPU FL kit, however riser R3B does not support GPU.
NOTE: ¹ The configuration 3-1 supports GPU only on slots 2 and 7.
Table 78. Components in the half length (HL) GPU kit
Components GPU HL GOLD kit GPU HL SLVR kit
Details Quantity Details Quantity
Risers Riser configuration 2-2
or 4-2
8 x HL risers (R1A or
R1C, R2A, R3A, or R3B,
R4A)
Riser configuration 2-2
or 4-2
8 x HL risers (R1A or
R1C, R2A, R3A, or R3B,
R4A)
Shroud GPU shroud 1 GPU shroud 1
Fans GOLD HPR 6 SLVR HPR 6
Heat sinks T-type heat sink
for processor 1 and
processor 2
2 T-type heat sink
for processor 1 and
processor 2
2
Cables N/A 0 N/A 0
Foam Mylar foam 1 Mylar foam 1
HL - Half Length, HPR - High Performance, SLVR - Silver
NOTE: * Refer to expansion card installation guidelines for more information on riser configuration supported for the
system.
Before you begin, follow the safefy guidelines and before working inside the system instructions.
224
Upgrade Kits