User Manual
Table Of Contents
- Dell EMC PowerEdge R750 Installation and Service Manual
- Contents
- About this document
- System overview
- Initial system setup and configuration
- Minimum to POST and system management configuration validation
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Cable routing
- M.2 SSD module
- Optional front bezel
- System cover
- Drive backplane cover
- Air shroud
- Removing the air shroud
- Installing the air shroud
- Removing the GPU air shroud
- Installing the GPU air shroud
- Removing the GPU air shroud top cover
- Installing the GPU air shroud top cover
- Removing the GPU air shroud filler
- Installing the GPU air shroud filler
- Removing the rear drive module air shroud
- Installing the rear drive module air shroud
- Cooling fans
- Side wall brackets
- Drives
- Rear drive module
- Drive backplane
- PERC module
- System memory
- Processor and heat sink module
- Expansion cards and expansion card risers
- Expansion card installation guidelines
- Removing the expansion card risers
- Installing the expansion card risers
- Removing expansion card from the expansion card riser
- Installing an expansion card into the expansion card riser
- Removing the full length expansion card risers
- Installing the full length expansion card risers
- Removing a GPU
- Installing a GPU
- Removing R1 and R3 paddle cards
- Installing R1 and R3 paddle cards
- Optional serial COM port
- Optional VGA port for liquid cooling module
- Optional IDSDM module
- MicroSD card
- Optional BOSS S2 module
- System battery
- Optional internal USB card
- Intrusion switch module
- Optional OCP card
- Power supply unit
- Trusted Platform Module
- System board
- LOM card and rear I/O board
- Control panel
- Upgrade Kits
- Jumpers and connectors
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Upgrade Kits
The table lists the available After Point Of Sale [APOS] kits.
Table 75. Upgrade kits
Kits Related links to service instructions
Bezel See Installing the front bezel
Boss See Installing the M.2 SSD module
BOSS S2 See Installing the BOSS S2 controller card module
Embedded management (IDSDM) See IDSDM kit
GPU See GPU kit
Accelerator enablement kit See GPU kit
Hard drives See Installing the drive
Hard drives SSD See Installing the drive into the carrier
Memory See Installing a memory module
Network cards (Standard PCIe adapter
LP/FH)
See Installing the LOM card and rear I/O board
Network cards (OCP) See Installing the OCP card
PCIe SSD card See Installing the drive
Power cords N/A
Power supplies See Installing a power supply unit
Quick sync N/A
SD cards See Installing the MicroSD card
TPM See Upgrading the Trusted Platform Module
Processor enablement thermal kits See Installing the processor
Internal USB 3.0 card See Internal USB card kit
Serial COM port daughter card See Installing the serial COM port
VGA port for liquid cooling system See Installing the VGA port
Cables N/A
Fans See Installing a fan
Heat sink See Installing a processor heat sink module
Risers See Installing the expansion riser
Rail N/A
CMA N/A
Topics:
• BOSS S2 module kit
• GPU kit
• IDSDM kit
6
220 Upgrade Kits