User Manual
Table Of Contents
- Dell EMC PowerEdge R750 Installation and Service Manual
- Contents
- About this document
- System overview
- Initial system setup and configuration
- Minimum to POST and system management configuration validation
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Cable routing
- M.2 SSD module
- Optional front bezel
- System cover
- Drive backplane cover
- Air shroud
- Removing the air shroud
- Installing the air shroud
- Removing the GPU air shroud
- Installing the GPU air shroud
- Removing the GPU air shroud top cover
- Installing the GPU air shroud top cover
- Removing the GPU air shroud filler
- Installing the GPU air shroud filler
- Removing the rear drive module air shroud
- Installing the rear drive module air shroud
- Cooling fans
- Side wall brackets
- Drives
- Rear drive module
- Drive backplane
- PERC module
- System memory
- Processor and heat sink module
- Expansion cards and expansion card risers
- Expansion card installation guidelines
- Removing the expansion card risers
- Installing the expansion card risers
- Removing expansion card from the expansion card riser
- Installing an expansion card into the expansion card riser
- Removing the full length expansion card risers
- Installing the full length expansion card risers
- Removing a GPU
- Installing a GPU
- Removing R1 and R3 paddle cards
- Installing R1 and R3 paddle cards
- Optional serial COM port
- Optional VGA port for liquid cooling module
- Optional IDSDM module
- MicroSD card
- Optional BOSS S2 module
- System battery
- Optional internal USB card
- Intrusion switch module
- Optional OCP card
- Power supply unit
- Trusted Platform Module
- System board
- LOM card and rear I/O board
- Control panel
- Upgrade Kits
- Jumpers and connectors
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Table 66. Configuration 3-1: R1A + R2B + R3B + R4A (FL) (continued)
Card type Slot priority Maximum number of cards
Intel (NIC: 10Gb, FH) 5, 4, 7, 2 4
Qlogic (NIC: 10Gb, FH) 5, 4, 7, 2 4
Broadcom (NIC: 10Gb, LP) 6 1
Intel (NIC: 10Gb, LP) 6 1
Qlogic (NIC: 10Gb, LP) 6 1
Broadcom (NIC: 1Gb, FH) 5, 4, 7, 2 4
Intel (NIC: 1Gb, FH) 5, 4, 7, 2 4
Broadcom (NIC: 1Gb, LP) 6 1
Intel (NIC: 1Gb, LP) 6 1
Mellanox (NIC: HDR100 VPI, FH) 7, 2 2
Mellanox (NIC: HDR100 VPI, LP) 3 1
Mellanox (NIC:HDR VPI, FH) 7, 2 2
Mellanox (NIC:HDR VPI, LP) 3 1
Intel (NIC:ACC100, FH) 7, 2 2
Mellanox (OCP: 25Gb) Integrated slot 1
SolarFlare (OCP: 25Gb) Integrated slot 1
Broadcom (OCP: 25Gb) Integrated slot 1
Intel (OCP: 25Gb) Integrated slot 1
QLogic (OCP: 25Gb) Integrated slot 1
Broadcom (OCP: 10Gb) Integrated slot 1
Intel (OCP: 10Gb) Integrated slot 1
QLogic (OCP: 10Gb) Integrated slot 1
Broadcom (OCP: 1Gb) Integrated slot 1
Intel (OCP: 1Gb) Integrated slot 1
Foxconn (External Adapter- H840, FH) 5, 4, 7, 2 4
Foxconn (External Adapter - HBA355e, H840, FH,
LP)
5, 4, 7, 2, 6 5
Foxconn (External Adapter - HBA355e, H840, LP) 6 1
Dell (External Adapter- H840, FH, LP) 5, 4, 7, 2, 6 5
Inventec (BOSS S1, FH) 5, 4, 7, 2 1
Inventec (BOSS S1, LP) 6 1
Inventec (BOSS S2 Adapter) Integrated slot 1
Samsung (PCIe SSD, FH, LP) 5, 4, 7, 2 4
Table 67. Configuration 3-2: R1A + R2B + R3B + R4A (HL)
Card type Slot priority Maximum number of cards
Inventec (VGA, FH) 4 1
Inventec (Serial Port, FH) 4 1
Installing and removing system components 137