User Manual
Table Of Contents
- Dell EMC PowerEdge R750 Installation and Service Manual
- Contents
- About this document
- System overview
- Initial system setup and configuration
- Minimum to POST and system management configuration validation
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Cable routing
- M.2 SSD module
- Optional front bezel
- System cover
- Drive backplane cover
- Air shroud
- Removing the air shroud
- Installing the air shroud
- Removing the GPU air shroud
- Installing the GPU air shroud
- Removing the GPU air shroud top cover
- Installing the GPU air shroud top cover
- Removing the GPU air shroud filler
- Installing the GPU air shroud filler
- Removing the rear drive module air shroud
- Installing the rear drive module air shroud
- Cooling fans
- Side wall brackets
- Drives
- Rear drive module
- Drive backplane
- PERC module
- System memory
- Processor and heat sink module
- Expansion cards and expansion card risers
- Expansion card installation guidelines
- Removing the expansion card risers
- Installing the expansion card risers
- Removing expansion card from the expansion card riser
- Installing an expansion card into the expansion card riser
- Removing the full length expansion card risers
- Installing the full length expansion card risers
- Removing a GPU
- Installing a GPU
- Removing R1 and R3 paddle cards
- Installing R1 and R3 paddle cards
- Optional serial COM port
- Optional VGA port for liquid cooling module
- Optional IDSDM module
- MicroSD card
- Optional BOSS S2 module
- System battery
- Optional internal USB card
- Intrusion switch module
- Optional OCP card
- Power supply unit
- Trusted Platform Module
- System board
- LOM card and rear I/O board
- Control panel
- Upgrade Kits
- Jumpers and connectors
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Table 63. Configuration 1: R1B + R2A + R3B + R4B (continued)
Card type Slot priority Maximum number of cards
Inventec (Serial Port, FH) 4, 8 1
Inventec (LOM) Integrated slot 1
NVIDIA (GPU A2, LP) 3, 6 2
NVIDIA (GPU A2, FH) 5, 1, 7, 2 4
Inventec (FPERC 10.15) Integrated slot 2
Foxconn (FPERC 10.15) Integrated slot 2
Foxconn (FPERC 11) Integrated slot 2
Foxconn (FPERC HBA11) Integrated slot 2
Foxconn (APERC 10.15, FH) 2, 1 1
Foxconn (APERC11, FH) 2, 1 1
Inventec (APERC 10.15) 2, 1 1
Foxconn (APERC HBA11,FH) 2, 1 1
Mellanox (NIC: 100Gb, LP) 6, 3 2
Broadcom (NIC: 100Gb, LP) 6, 3 2
Intel (NIC: 100Gb, LP) 6, 3 2
Emulex (HBA: FC64, LP) 6, 3 2
Emulex (HBA: FC64, FH) 5, 4, 7, 2, 1 5
Mellanox (NIC: 25Gb, FH) 5, 4, 7, 2, 1 5
SolarFlare (NIC: 25Gb, FH) 5, 4, 7, 2, 1 5
Broadcom (NIC: 25Gb, FH) 5, 4, 7, 2, 1 5
Intel (NIC: 25Gb, FH) 5, 4, 7, 2, 1 5
Qlogic (NIC: 25Gb, FH) 5, 4, 7, 2, 1 5
Nvidia Mellanox (SmartNIC:25Gb) 5, 4, 8, 7, 2, 1 6
Mellanox (NIC: 25Gb, LP) 6, 3 2
SolarFlare (NIC: 25Gb, LP) 6, 3 2
Broadcom (NIC: 25Gb, LP) 6, 3 2
Intel (NIC: 25Gb, LP) 6, 3 2
Qlogic (NIC: 25Gb) 6, 3 2
Emulex (HBA: FC32, FH) 5, 4, 7, 2, 1 5
Broadcom (HBA: FC32, FH) 5, 4, 7, 2, 1 5
Qlogic (HBA: FC32, FH) 5, 4, 7, 2, 1 5
Emulex (HBA: FC32, LP) 6, 3 2
Broadcom (HBA: FC32, LP) 6, 3 2
Qlogic (HBA: FC32, LP) 6, 3 2
Emulex (HBA: FC16, FH) 5, 4, 7, 2, 1 5
Broadcom (HBA: FC16, FH) 5, 4, 7, 2, 1 5
QLogic (HBA: FC16, FH) 5, 4, 7, 2, 1 5
Installing and removing system components 129