User Manual
Table Of Contents
- Dell EMC PowerEdge R750 Installation and Service Manual
- Contents
- About this document
- System overview
- Initial system setup and configuration
- Minimum to POST and system management configuration validation
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Cable routing
- M.2 SSD module
- Optional front bezel
- System cover
- Drive backplane cover
- Air shroud
- Removing the air shroud
- Installing the air shroud
- Removing the GPU air shroud
- Installing the GPU air shroud
- Removing the GPU air shroud top cover
- Installing the GPU air shroud top cover
- Removing the GPU air shroud filler
- Installing the GPU air shroud filler
- Removing the rear drive module air shroud
- Installing the rear drive module air shroud
- Cooling fans
- Side wall brackets
- Drives
- Rear drive module
- Drive backplane
- PERC module
- System memory
- Processor and heat sink module
- Expansion cards and expansion card risers
- Expansion card installation guidelines
- Removing the expansion card risers
- Installing the expansion card risers
- Removing expansion card from the expansion card riser
- Installing an expansion card into the expansion card riser
- Removing the full length expansion card risers
- Installing the full length expansion card risers
- Removing a GPU
- Installing a GPU
- Removing R1 and R3 paddle cards
- Installing R1 and R3 paddle cards
- Optional serial COM port
- Optional VGA port for liquid cooling module
- Optional IDSDM module
- MicroSD card
- Optional BOSS S2 module
- System battery
- Optional internal USB card
- Intrusion switch module
- Optional OCP card
- Power supply unit
- Trusted Platform Module
- System board
- LOM card and rear I/O board
- Control panel
- Upgrade Kits
- Jumpers and connectors
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Table 62. Configuration 0: R1B + R4B (continued)
Card type Slot priority Maximum number of cards
Foxconn (APERC 10.15) 2, 1 1
Foxconn (APERC 11) 2, 1 1
Inventec (APERC 10.15) 2, 1 1
Foxconn (APERC HBA11) 2, 1 1
Emulex (HBA:FC64) 7, 2, 1 3
Mellanox (NIC:25Gb) 7, 2, 1 3
SolarFlare (NIC: 25Gb) 7, 2, 1 3
Broadcom (NIC:25Gb) 7, 2, 1 3
Intel (NIC:25Gb) 7, 2, 1 3
Qlogic -Marvell (NIC: 25Gb) 7, 2, 1 3
Nvidia Mellanox (SmartNIC:25Gb) 8, 7, 2, 1 4
Emulex (HBA:FC32) 7, 2, 1 3
Qlogic (HBA:FC32) 7, 2, 1 3
Emulex (HBA:FC16) 7, 2, 1 3
QLogic (HBA:FC16) 7, 2, 1 3
Broadcom (NIC:10Gb) 7, 2, 1 3
Intel (NIC:10Gb) 7, 2, 1 3
Qlogic Marvell (NIC: 10Gb) 7, 2, 1 3
Broadcom (NIC:1Gb) 7, 2, 1 3
Intel (NIC:1Gb) 7, 2, 1 3
Mellanox (OCP:25Gb) Integrated slot 1
SolarFlare (OCP:25Gb) Integrated slot 1
Broadcom (OCP:25Gb) Integrated slot 1
Qlogic (OCP:25Gb) Integrated slot 1
Intel (OCP:25Gb) Integrated slot 1
Broadcom (OCP:10Gb) Integrated slot 1
Intel (OCP:10Gb) Integrated slot 1
QLogic (OCP:10Gb) Integrated slot 1
Broadcom (OCP:1Gb) Integrated slot 1
Intel (OCP:1Gb) Integrated slot 1
Foxconn (External Adapter) 7, 2, 1 3
Inventec (BOSS S1 Full height) 8, 7, 2, 1 1
Inventec (BOSS S2 Adapter) Integrated slot 1
Samsung (PCIe SSD) 8, 7, 2, 1 4
Table 63. Configuration 1: R1B + R2A + R3B + R4B
Card type Slot priority Maximum number of cards
Inventec (VGA, FH) 4, 8 1
128 Installing and removing system components