User Manual
Table Of Contents
- Dell EMC PowerEdge R750 Installation and Service Manual
- Contents
- About this document
- System overview
- Initial system setup and configuration
- Minimum to POST and system management configuration validation
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Cable routing
- M.2 SSD module
- Optional front bezel
- System cover
- Drive backplane cover
- Air shroud
- Removing the air shroud
- Installing the air shroud
- Removing the GPU air shroud
- Installing the GPU air shroud
- Removing the GPU air shroud top cover
- Installing the GPU air shroud top cover
- Removing the GPU air shroud filler
- Installing the GPU air shroud filler
- Removing the rear drive module air shroud
- Installing the rear drive module air shroud
- Cooling fans
- Side wall brackets
- Drives
- Rear drive module
- Drive backplane
- PERC module
- System memory
- Processor and heat sink module
- Expansion cards and expansion card risers
- Expansion card installation guidelines
- Removing the expansion card risers
- Installing the expansion card risers
- Removing expansion card from the expansion card riser
- Installing an expansion card into the expansion card riser
- Removing the full length expansion card risers
- Installing the full length expansion card risers
- Removing a GPU
- Installing a GPU
- Removing R1 and R3 paddle cards
- Installing R1 and R3 paddle cards
- Optional serial COM port
- Optional VGA port for liquid cooling module
- Optional IDSDM module
- MicroSD card
- Optional BOSS S2 module
- System battery
- Optional internal USB card
- Intrusion switch module
- Optional OCP card
- Power supply unit
- Trusted Platform Module
- System board
- LOM card and rear I/O board
- Control panel
- Upgrade Kits
- Jumpers and connectors
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Table 47. Supported Intel Persistent Memory 200 series (BPS) for dual processor
configurations (continued)
Configuration Description per
processor
Memory population rules
RDIMMs or LRDIMMs Intel Persistent Memory 200
series (BPS)
Processor2 {B1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,
12, 15, 16}
NOTE: There are limited configurations available for dual socket servers with only one processor populated.
Table 48. Intel Persistent Memory 200 series (BPS) Configuration 1 - 4 x RDIMMs, 4 x Intel Persistent
Memory 200 series (BPS) per processor
Total No of
RDIMMs
Total No of
Intel Persistent
Memory 200
series (BPS)
DIMMs
1 RDIMM
capacity (GB)
1 Intel
Persistent
Memory 200
series (BPS)
capacity (GB)
Total Standard
Memory Capacity
(GB)
Total PM
Capacity
(GB)
Supported
Modes
4 4 16 128 64 512 MM or AD
4 4 32 128 128 512 MM or AD
4 4 64 128 256 512 AD
4 4 16 256 64 1024 MM or AD
4 4 32 256 128 1024 MM or AD
4 4 64 256 256 1024 MM or AD
4 4 16 512 64 2048 AD
4 4 32 512 128 2048 MM or AD
4 4 64 512 256 2048 MM or AD
Table 49. Intel Persistent Memory 200 series (BPS) Configuration 1 - 4 x LRDIMMs, 4 x Intel Persistent
Memory 200 series (BPS) per processor
Total No of
LRDIMMs
Total No of
Intel Persistent
Memory 200
series (BPS)
DIMMs
1 LRDIMM
capacity (GB)
1 Intel
Persistent
Memory 200
series (BPS)
capacity (GB)
Total Standard
Memory Capacity
(GB)
Total PM
Capacity
(GB)
Supported
Modes
4 4 128 128 512 512 AD
4 4 128 256 512 1024 AD
4 4 128 512 512 2048 MM or AD
Table 50. Intel Persistent Memory 200 series (BPS) Configuration 2 - 6 x RDIMMs, 1 x Intel Persistent
Memory 200 series (BPS) per processor
Total No of
RDIMMs
Total No of
Intel
Persistent
Memory 200
series (BPS)
DIMMs
1 RDIMM
capacity (GB)
1 Intel
Persistent
Memory 200
series (BPS)
capacity (GB)
Total Standard
Memory Capacity
(GB)
Total PM
Capacity
(GB)
Supported Modes
6 1 16 128 96 128 AD
6 1 32 128 192 128 AD
6 1 64 128 384 128 AD
6 1 16 256 96 256 AD
102 Installing and removing system components