User`s guide

Entering Values
Using the operator panel, enter the values that you found in the color registration chart to make
adjustments.
Press Menu.1.
Press until Admin Menu appears, and then press .2.
Press until Maintenance appears, and then press .3.
Press until Color Reg Adj appears, and then press .4.
Press until Enter Number appears, and then press .
The cursor is located at the first digit of the Enter Number.
5.
Press or until you reach the value (for example, +3) displayed on the chart.6.
Press once and move the cursor to the next value.7.
Repeat steps 6 and 7 to enter all of the digits of the Enter Number, and then press .8.
Press until ColorRegi Chart appears, and then press .
The color registration chart is printed with the new values.
9.
Color registration adjustment is complete when the straightest Y (Yellow), M (Magenta), and C (Cyan)
lines are next to the 0 line.
10.
CAUTION: After printing the color registration chart, do not turn off the printer until the
printer motor has stopped running.
Downloaded from ManualsPrinter.com Manuals