Specifications

Monitoring and Administration
BIG-IP® Reference Guide 11 - 23
The following table contains descriptions of each of the metrics collected for
the BIG-IP.
bigip springbank
(cur, max, tot) = (0, 8, 374)
(pckts,bits) in = (15310, 10860064), out = (28363, 313009048)
virtual 11.11.11.50
(cur, max, limit, tot) = (0, 8, 370, 370)
(pckts,bits) in = (10704, 8744872), out = (21480, 230874016)
virtual 11.11.11.50:http UP
(cur, max, limit, tot) = (0, 8, 370, 370)
(pckts,bits) in = (10704, 8744872), out = (21480, 230874016)
virtual 11.11.11.101
(cur, max, limit, tot) = (0, 2, 4, 4)
(pckts,bits) in = (4532, 2090768), out = (6824, 82113984)
virtual 11.11.11.101:http UP
(cur, max, limit, tot) = (0, 2, 4, 4)
(pckts,bits) in = (4532, 2090768), out = (6824, 82113984)
node 11.12.11.100 UP
(cur, max, limit, tot) = (0, 8, 374, 374)
(pckts,bits) in = (15236, 10835640), out = (28304, 312988000)
node 11.12.11.100:http UP
(cur, max, limit, tot) = (0, 8, 374, 374)
(pckts,bits) in = (15236, 10835640), out = (28304, 312988000)
port WILDCARD PORT
(cur, max, limit, tot, reaped) = (0, 0, 0, 0, 0)
(pckts,bits) in = (0, 0), out = (0, 0)
port 80:http
(cur, max, limit, tot, reaped) = (0, 8, 374, 374, 6)
(pckts,bits) in = (15236, 10835640), out = (28304, 312988000)
Figure 11.6 Sample output of the bigstat command