Specifications

Chapter 7: bigpipe Command Reference
7-42
snat
Defines one or more addresses that nodes can use as a source IP address
when initiating connections to hosts on the external network. Note that
clients cannot use SNAT addresses to connect directly to nodes.
b snat map <orig_ip> [...<orig_ip>] to <snat_ip><snat_ip> [unit <unit ID>] [netmask
<ip>] [arp disable] [vlan <vlan_name_list> disable]
b snat map default to <snat_ip> [unit <unit ID>] [netmask <ip>]
b snat <snat_ip> [...<snat_ip>] delete | show
b snat default delete | show
b snat default dump [verbose]
b snat [<snat_ip> [...<snat_ip>] ] dump [verbose]
b snat globals show
b snat default show
b snat [<snat_ip> [...<snat_ip>] ] show
b snat [<snat_ip> [...<snat_ip>] ] delete
b snat [<snat_ip> [...<snat_ip>] ] arp show
b snat [<orig_ip> [...<orig_ip>] limit <max_conn>
b snat limit <max_conn>
b snat default limit <max conn>
b snat <orig_ip> [...<orig_ip>] mirror enable | disable
b snat default mirror enable | disable
b snat <orig_ip> [...<orig_ip>] timeout tcp | udp <seconds>
b snat default timeout tcp | udp <seconds>
b snat <orig_ip> [...<orig_ip>] stats reset
b snat default stats reset
b snat <orig_ip> [...<orig_ip>]> disable | enable
b snat <snat_ip> [...<snat_ip>] vlans <vlan_list> disable | enable
b snat <snat_ip> [...<snat_ip>] vlans enable all
b snat <snat_ip> [...<snat_ip>] vlans show
b snat map <vlan_name> to auto
b snat <snat_ip> [...<snat_ip>] arp [enable|disable]