Specifications

service
BIG-IP® Reference Guide 7-41
service
Enables and disables network traffic on services, and also sets connection
limits and timeouts. You can use port numbers or service names (for
example, www, http, or 80) for the <service> parameter. Note that the
settings you define with this command control the service for all virtual
servers that use it. By default, all services are disabled.
A port is any valid port number, between 0 and 65535, inclusive, or any
valid service name in the /etc/services file.
b service <service> [<service>...] limit <limit>
b service <service> [<service>...] tcp enable | disable
b service <service> [<service>...] timeout tcp <timeout>
b service <service> [<service>...] udp enable | disable
b service <service> [<service>...] timeout udp <timeout>
b service [<service>... ] show
b service [<service>... ] stats reset