Specifications

Chapter 7: bigpipe Command Reference
7-30
node
Displays information about nodes and allows you to set properties for nodes,
and node addresses. Nodes may be identified using wildcard notation. Thus
* represents all nodes on the network, *.80 represents all port 80 nodes,
11.11.11.1:* represents all nodes with address 11.11.11.1.
b node <node_ip>[:<service>]... enable | disable
b node <node_ip>[:<service>... show
b node <node_ip>[:<service>]... limit <max_conn>
b node [<node_ip>:<service>]... stats reset
b node <node_ip>[:service] up | down
b node <node_ip>[:<service>] monitor use <monitor_name> [and <monitor_name>]...
b node [<node_ip>[:<service>]] monitor show | delete
b node <node_ip>[<node_ip>]... virtual | actual