Specifications

Chapter 7: bigpipe Command Reference
7-2
makecookie Loads the BIG-IP configuration without resetting the current configuration. 7-21
merge Loads a saved BIG-IP configuration without resetting the current configuration. 7-22
mirror Copies traffic from any port or set of ports to a single, separate port. 7-23
monitor Defines a health check monitor. 7-24
-n Displays addresses and ports numerically rather than by name. 7-28
nat Defines external network address translations for nodes. 7-29
node Defines node property settings. 7-30
pool Defines load balancing pools. 7-31
proxy Defines the properties of the SSL gateway for the SSL Accelerator. 7-33
ratio Sets load-balancing weights and priority levels used in the Ratio and Priority load
balancing modes.
7-35
reset Clears the BIG-IP configuration and counter values. 7-36
rule Defines load balancing rules. 7-37
save Writes the current configuration to a file. 7-39
self Assigns a self IP address for a VLAN or interface. 7-40
service Defines properties for services. 7-41
snat Defines and sets options for SNAT (Secure NAT). 7-42
stp Implements spanning tree protocol (STP). 7-43
summary Displays summary statistics for the BIG-IP. 7-44
trunk Aggregates links to form a trunk. 7-45
unit Displays the unit number assigned to a particular BIG-IP. 7-46
verbose Used to modify the verbose log level. 7-47
verify Parses the command line and checks syntax without executing the specified
command.
7-48
version Displays the bigpipe utility version number. 7-49
virtual Defines virtual servers, virtual server mappings, and virtual server properties. 7-50
vlan Defines VLANs, VLAN mappings, and VLAN properties. 7-51
vlangroup Defines VLAN groups. 7-52
Command Description Page