Users Guide


USB Upstream Connector

USB Downstream Connector

USB Ports
l 1 upstream - rear
l 4 downstream - 2 on rear; 2 on left side

Card Reader Specifications
Overview
l The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card.

l The Flash Memory Card Reader is automatically recognized by Windows®2000 and XP.

l Once installed and recognized, each separate memory card (slot) appears as a separate drive/drive letter.

l All standard file operations (copy, delete, drag-and-drop, etc.) can be performed with this drive.
This monitor supports High-Speed Certified USB 2.0 interface.


Data Rate
PowerConsumption
High speed
480 Mbps
2.5W(Max.,eachport)
Full speed
12 Mbps
2.5W(Max.,eachport)
Low speed
1.5 Mbps
2.5W(Max.,eachport)
Pin Number
4-pin Side of the connector
1
DMU
2
VCC
3
DPU
4
GND
Pin Number
4-Pin Side of the Signal Cable
1
VCC
2
DMD
3
DPD
4
GND
NOTE:
USB2.0capabilityrequires2.0capablecomputer
NOTE: The monitor's USB interface works only when the monitor is on or in power save mode, If you switch the monitor off and then on,
attached peripherals may take a few seconds to resume normal functionality.