Users Guide

24  │  Setting up the monitor
Setting up the monitor
Connecting the stand
NOTE: The stand is not factory-installed.
NOTE: The following instructions are applicable only for attaching the
stand that was shipped with your monitor. If you are attaching a stand
that you purchased from any other source, follow the setup
instructions that were included with the stand.
To attach the monitor stand:
1. F
ollow the instructions on the flaps of carton to remove the stand from the
top cushion that secures it.
2. R
emove the stand base and stand riser from the packaging cushion.
3. Align and place the stand riser on the stand base.
4. Open the
screw handle at the bottom of the stand base and turn it clockwise
to secure the stand assembly.
5. C
lose the screw handle.