Service manual

Alignment and Troubleshooting
4-11
Service Manual
1. If the paper is not feeding properly, pull the
paper out of the printer.
2. Open and close the front cover to resume
printing.
1. Open the front cover and lightly pull the toner
cartridge straight out.
2. Remove the paper by gently pulling it straight
out.
3. Replace the toner cartridge and close the front
cover.
Printing automatically resumes.
4.1.2.3 MPF Jam
4.1.2.4 Fuser Area Jam
NOTICE: The fuser area is hot. Take care when removing paper from the printer.