Users Guide

95
Setting the paper feeding flow
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select Tray Behavior .
4 Press the up/down arrows to select Configure MPF .
5 Press the left/right arrows to select the paper tray you are using.
•
Tray Mode : When sending a print job from the computer, the printer uses paper in
the tray which you have already set in Printer properties. In this mode the MPF is
treated as another paper tray. Instead of treating MPF as first preference paper
source, printer pulls paper from the tray that matches the size and type. The first
preference goes to the default source.
•
Bypass Mode : When sending a print job from the computer and the MPF is filled
with paper, the printer uses the paper in the MPF first. In this mode the printer pulls
the paper from MPF first unless it is closed or empty. MPF gets the highest priority
and pulls whatever media present in the MPF.
Bypass Mode is set as a default
setting.
6 Press the home icon ( ) to return to the Standby mode.
Setting the paper auto feeding
When the paper is mismatched, the machine waits for a while (about few seconds) and starts
printing automatically even if the paper mismatches.
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select Tray Behavior .
4 Press the up/down arrows to select the Auto Continue .
5 Press the left/right arrows to select the On you want to use.
6 Press the home icon ( ) to return to the Standby mode.