Users Guide
Table Of Contents
- Dell™ 2355dn Laser MFP User’s Guide
- Contacting Dell
- Finding Information
- Contents
- Unpacking Your Printer
- About Your Printer
- Introducing the Home Screen
- Internal Fonts
- Setting up the hardware
- Installing the Toner Cartridge
- Loading Paper
- Making Connections
- Powering On the Printer
- Dell 2355dn Laser MFP Menu Functions
- Printing the Printer setting and Op-panel Menu setting
- Setting the Machine ID
- Changing the Display Language
- Selecting Country
- Power Save Mode
- Setting the Sound/Volume
- Setting Daylight Savings Time (Only for USA)
- Scanner Lamp Power Save Mode
- Changing the Default Mode
- Setting the Time Out Option
- Setting the Job Management
- Setting the Toner Save Mode
- Setting the Timing of Toner Low Alert
- Ignoring Blank Pages
- Ignoring the Toner Low Message (Only for Fax)
- Software Overview
- Dell Printer Configuration Web Tool
- Installing Software in Microsoft® Windows® Operating System
- Uninstalling Software
- Using the Dell Toner Management System
- Printer Settings Utility
- Firmware Update Utility
- Set IP Address Utility
- Paper Handling
- Printing
- Copying
- Scanning
- Scanning Overview
- SmarThru Office
- Scanning Using Dell Scan Manager
- Scanning to a PC Application
- Scanning and Sending an Email
- Scanning and Sending to SMB Server
- Scanning and Sending to FTP Server
- Scanning and Sending Custom Email
- Scan to Fax Server
- Scanning Using the Windows Image Acquisition (WIA) Driver
- Scanning to the USB Memory
- Managing the USB Memory
- Scan to Email Setup
- Scanning by a network connection
- Setting up Address Book
- Group Numbers
- Changing Default Settings
- Networking
- Faxing
- Macintosh
- Linux
- Maintenance
- Troubleshooting
- Installing Accessories
- Specifications
- Index
59
5
When the installation is complete, you may print a test page. Click
Finish
to complete
the installation and close the wizard. You are now ready to print.
Network Installation
Assigning an IP Address
Before using the printer on the network, you must set an IP address, subnet mask, and gateway
for the printer. If you want DHCP or BOOTP to automatically set the IP address, a DHCP or
BOOTP server must exist on the network.
If the network is using DHCP/BOOTP, an IP address is automatically assigned after
connecting the network cable to the printer. In case no DHCP or BOOTP the printer will
automatically assign a legacy IP address 192.0.0192 or local link address 169.254.xxx.xxx.
To configure the IP address manually, you can use the supplied "Installing Software in
Microsoft® Windows® Operating System" CD. Print the Configuration page of the printer to
see the current network configuration and MAC address. You will need this information to
configure the printer for the network.
1
Ensure that the printer is connected to your network and powered on. Close all programs.
2
Insert the "Installing Software in Microsoft® Windows® Operating System" CD.
NOTE: For Windows Vista/Windows 7/Server 2008 R2, click Continue when the User Account
Control screen appears.
NOTE: If user has disabled auto continue, then please open setup.exe from CD root folder.
3
Select
Set IP Address
. The list of printers is available on the network displays.