Users Guide

46
Setting the Job Management
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select the job management and press Job Management .
4 Set each option as you want.
•
Stored Jobs : Print jobs currently stored in the RAM disk.
•
Job Expiration : Limits the amount of time a confidential job stays in the printer
before it is deleted.
•
Clear Stored Job : You can delete jobs currently stored in the RAM disk. If you select
the
ALL , all Secure Job and Stored Print are deleted.
5 Press the home icon ( ) to return to the Standby mode.
Setting the Toner Save Mode
Toner save mode allows your machine to use less toner on each page. Activating this mode
extends the life of the toner cartridge beyond what one would experience in the normal mode,
but it reduces print quality.
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select Initial Setup .
4 Press the up/down arrows to select Toner Save .
5 Press the left/right arrows to select On .
6 Press the home icon ( ) to return to the Standby mode.
Setting the Timing of Toner Low Alert
You can customize the level to alert toner low or toner empty. If the current toner amount
drops below the setting level, the printer will display a warning message on the operator panel.
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select Initial Setup .
4 Press the up/down arrows to select Toner Status Alert .
5 Press the option you want.
6 Press the left/right arrows to select the option in Warning Level and Alert On Panel .
7 Press the home icon ( ) to return to the Standby mode.