Users Guide
Table Of Contents
- Dell™ 2355dn Laser MFP User’s Guide
- Contacting Dell
- Finding Information
- Contents
- Unpacking Your Printer
- About Your Printer
- Introducing the Home Screen
- Internal Fonts
- Setting up the hardware
- Installing the Toner Cartridge
- Loading Paper
- Making Connections
- Powering On the Printer
- Dell 2355dn Laser MFP Menu Functions
- Printing the Printer setting and Op-panel Menu setting
- Setting the Machine ID
- Changing the Display Language
- Selecting Country
- Power Save Mode
- Setting the Sound/Volume
- Setting Daylight Savings Time (Only for USA)
- Scanner Lamp Power Save Mode
- Changing the Default Mode
- Setting the Time Out Option
- Setting the Job Management
- Setting the Toner Save Mode
- Setting the Timing of Toner Low Alert
- Ignoring Blank Pages
- Ignoring the Toner Low Message (Only for Fax)
- Software Overview
- Dell Printer Configuration Web Tool
- Installing Software in Microsoft® Windows® Operating System
- Uninstalling Software
- Using the Dell Toner Management System
- Printer Settings Utility
- Firmware Update Utility
- Set IP Address Utility
- Paper Handling
- Printing
- Copying
- Scanning
- Scanning Overview
- SmarThru Office
- Scanning Using Dell Scan Manager
- Scanning to a PC Application
- Scanning and Sending an Email
- Scanning and Sending to SMB Server
- Scanning and Sending to FTP Server
- Scanning and Sending Custom Email
- Scan to Fax Server
- Scanning Using the Windows Image Acquisition (WIA) Driver
- Scanning to the USB Memory
- Managing the USB Memory
- Scan to Email Setup
- Scanning by a network connection
- Setting up Address Book
- Group Numbers
- Changing Default Settings
- Networking
- Faxing
- Macintosh
- Linux
- Maintenance
- Troubleshooting
- Installing Accessories
- Specifications
- Index
38
3
Connect the other end of the cable to an available USB port on the computer, not the
USB keyboard.
Connecting the printer to the Network
1
Ensure that the printer, computer, and any other attached devices are powered off and
unplugged.
2
Connect one end of a standard category 5 Unshielded Twisted Pair (UTP) network cable
to a LAN drop or hub, and the other end to the Ethernet network port on the back of the
printer. The printer automatically adjusts for the network speed.
NOTE: After connecting the printer, you need to configure the network parameters on the operator
panel. See "Printing a Network Configuration Page".