Users Guide
Table Of Contents
- Dell™ 2355dn Laser MFP User’s Guide
- Contacting Dell
- Finding Information
- Contents
- Unpacking Your Printer
- About Your Printer
- Introducing the Home Screen
- Internal Fonts
- Setting up the hardware
- Installing the Toner Cartridge
- Loading Paper
- Making Connections
- Powering On the Printer
- Dell 2355dn Laser MFP Menu Functions
- Printing the Printer setting and Op-panel Menu setting
- Setting the Machine ID
- Changing the Display Language
- Selecting Country
- Power Save Mode
- Setting the Sound/Volume
- Setting Daylight Savings Time (Only for USA)
- Scanner Lamp Power Save Mode
- Changing the Default Mode
- Setting the Time Out Option
- Setting the Job Management
- Setting the Toner Save Mode
- Setting the Timing of Toner Low Alert
- Ignoring Blank Pages
- Ignoring the Toner Low Message (Only for Fax)
- Software Overview
- Dell Printer Configuration Web Tool
- Installing Software in Microsoft® Windows® Operating System
- Uninstalling Software
- Using the Dell Toner Management System
- Printer Settings Utility
- Firmware Update Utility
- Set IP Address Utility
- Paper Handling
- Printing
- Copying
- Scanning
- Scanning Overview
- SmarThru Office
- Scanning Using Dell Scan Manager
- Scanning to a PC Application
- Scanning and Sending an Email
- Scanning and Sending to SMB Server
- Scanning and Sending to FTP Server
- Scanning and Sending Custom Email
- Scan to Fax Server
- Scanning Using the Windows Image Acquisition (WIA) Driver
- Scanning to the USB Memory
- Managing the USB Memory
- Scan to Email Setup
- Scanning by a network connection
- Setting up Address Book
- Group Numbers
- Changing Default Settings
- Networking
- Faxing
- Macintosh
- Linux
- Maintenance
- Troubleshooting
- Installing Accessories
- Specifications
- Index
294
Global address problems
Common Windows Problems
Condition Suggested solutions
LDAP Maximum Query
Exceeded...
There exists limitation for number of results from the LDAP server for each LDAP
query.
The range for the number of results is 0~100.
Set the query between 1 and 100.
LDAP Server Authentication
Failed...
If a device has invalid credential (ID or PW), LDAP server will return authentication
failure message.
LDAP Query Failed... If a user presses the STOP key during the search and no data was returned before
cancelling, the device will display this message.
LDAP No Such Attribute... Result is depending on the query from the device.
If a user sees this error message, changing the query can avoid this situation.
LDAP Address Not Found... This case is happening only when connection was successful and search result was
nothing.
LDAP Server Not Found... It could be a wrong IP address setup or Server is not working correctly.
Administrator can suspect the physical condition, device (client) configuration and
server status.
In case of device configuration, administrator should check IP address or hostname or
port number.
LDAP Time Limit Exceeded... It only happens when server is returning error code=8 which means "Server Time-out".
When server couldn't return all search result within the timeout.
This is abnormal case which is depending on the server side condition though.
A user can test server operation with other queries.
Condition Suggested solutions
“File in Use” message appears
during installation.
Exit all software applications. Remove all software from the StartUp Group, then
restart Windows. Reinstall the printer driver.
“General Protection Fault”,
“Exception OE”, “Spool32”, or
“Illegal Operation” messages
appear.
Close all other applications, reboot Windows and try printing again.