Users Guide
Table Of Contents
- Dell™ 2355dn Laser MFP User’s Guide
- Contacting Dell
- Finding Information
- Contents
- Unpacking Your Printer
- About Your Printer
- Introducing the Home Screen
- Internal Fonts
- Setting up the hardware
- Installing the Toner Cartridge
- Loading Paper
- Making Connections
- Powering On the Printer
- Dell 2355dn Laser MFP Menu Functions
- Printing the Printer setting and Op-panel Menu setting
- Setting the Machine ID
- Changing the Display Language
- Selecting Country
- Power Save Mode
- Setting the Sound/Volume
- Setting Daylight Savings Time (Only for USA)
- Scanner Lamp Power Save Mode
- Changing the Default Mode
- Setting the Time Out Option
- Setting the Job Management
- Setting the Toner Save Mode
- Setting the Timing of Toner Low Alert
- Ignoring Blank Pages
- Ignoring the Toner Low Message (Only for Fax)
- Software Overview
- Dell Printer Configuration Web Tool
- Installing Software in Microsoft® Windows® Operating System
- Uninstalling Software
- Using the Dell Toner Management System
- Printer Settings Utility
- Firmware Update Utility
- Set IP Address Utility
- Paper Handling
- Printing
- Copying
- Scanning
- Scanning Overview
- SmarThru Office
- Scanning Using Dell Scan Manager
- Scanning to a PC Application
- Scanning and Sending an Email
- Scanning and Sending to SMB Server
- Scanning and Sending to FTP Server
- Scanning and Sending Custom Email
- Scan to Fax Server
- Scanning Using the Windows Image Acquisition (WIA) Driver
- Scanning to the USB Memory
- Managing the USB Memory
- Scan to Email Setup
- Scanning by a network connection
- Setting up Address Book
- Group Numbers
- Changing Default Settings
- Networking
- Faxing
- Macintosh
- Linux
- Maintenance
- Troubleshooting
- Installing Accessories
- Specifications
- Index
28
Place the machine on a flat, stable surface so that there is no incline greater than 2 mm
(0.08 inch). Otherwise, printing quality may be affected.
2
Unpack the machine and check all the enclosed items.
3
Remove the tape holding the machine tightly.
4
Install the print cartridge.
5
Load paper. See "Loading Paper".
6
Make sure that all the cables are connected to the printer.
7
Turn the printer on.
NOTE:
When you move the printer, do not tilt or turn it upside down. Otherwise, the inside of the printer
may be contaminated by toner, which can cause damage to the printer or result in bad printing quality.
200 mm
(7.8 inches)
100 mm
(3.9 inches)
485 mm (19 inches)
200 mm
(7.8 inches)