Users Guide

278
Email Job is completed
with error :
Pop3
There is a problem in POP3. Configure the POP3 setting.
Fax Unit Error A problem has occurred in the fax unit. Unplug the power cord and plug it back in. If
the problem persists, please call for service.
Fax Job is completed with
error
Incompatiable
The receiving fax number is classified as junk
fax number.
Change the Junk Fax Setup option.
Fax Job is completed with
error :
Communication Error
The machine has a communication problem. Ask the sender to try again.
Fax Job is completed with
error :
Group not available
You have tried to select a group location
number where only a single location number
can be used, such as when adding locations for
a multiple send operation.
Use a speed dial number or dial a number
manually
Fax Job is completed with
error :
Line Busy
The receiving fax machine did not answer or
the line is already engaged.
Try again after in a few minutes.
Fax Job is completed with
error :
Line Error
Your machine cannot connect with the
receiving fax machine or has lost contact
because of a problem with the phone line.
Try again. If the problem persists, wait an
hour or so until the line is clear and then try
again.
OR
Tu r n t h e E C M m o d e on .
Fax Job is completed with
error :
No Answer
The remote fax machine has not answered
after several redial attempts.
Try again. Verify the number to ensure that a
fax can be received.
Fax Job is completed with
error :
Memory Full
The memory is full.
• Split the transmission into more than one
operation.
•Print received faxes.
•Cancel reserved fax in the
Priority Fax
feature.
Fuser Error
Low Heat Error
Over Heat Error
Fuser unit Error
There is a problem in the fuser unit. Unplug the power cord and plug it back in. If
the problem persists, please call for service.
Display message Meaning Suggested solutions