Users Guide

237
Configuring Printer Properties
Using the properties window provided by the Printers configuration, you can change the
various properties for your machine as a printer.
1 Open the Unified Driver Configurator.
If necessary, switch to Printers configuration.
2 Select your printer on the available printers list and click Properties .
3 The Printer Properties window opens.
The following five tabs display at the top of the window:
•
General : allows you to change the printer location and name. The name entered in
this tab displays on the printer list in Printers configuration.
•
Connection : allows you to view or select another port. If you change the printer port
from USB to parallel or vice versa while in use, you must re-configure the printer port
in this tab.
•
Driver : allows you to view or select another printer driver. By clicking Options , you
can set the default device options.
•
Jobs : shows the list of print jobs. Click Cancel Job to cancel the selected job and
select the
Show completed jobs check box to see previous jobs on the job list.
•
Classes : shows the class that your printer is in. Click Add to Class to add your printer
to a specific class or click
Remove from Class to remove the printer from the selected
class.
4 Click OK to apply the changes and close the Printer Properties Window.