Users Guide

209
Toll Save You can set your printer to store your faxes in memory and to send them at
the specified toll-saving time. For details about sending toll save faxes, see
"
Toll Save Mode".
Select Off to turn this feature off.
Select On to turn this feature on. You can set the start time and date; and the
end time and date for toll save mode.
Junk Fax Setup Using the Junk Fax Setup feature, the system will not accept faxes sent from
remote stations. Their numbers are stored in the memory as junk fax
numbers. This feature is useful for blocking any unwanted faxes.
Select Off to turn the feature off. Anybody can send you a fax.
Select On to turn the feature on. You can set up to 10 fax numbers as junk fax
numbers. After storing the numbers, you do not receive any faxes from the
registered stations.
Secure Receive You can keep your received faxes from being accessed by unauthorized
people.
For further details about setting this mode, see "
Using the Secure Receiving
Mode".
Prefix Dial You can set a prefix dial number of up to five digits. This number dials before
any auto dial number is started. It is useful for accessing the PABX exchange.
Stmp Rcvd Name This option allows the printer to automatically print the page number, and
the date and time of the reception at the bottom of each page of a received
document.
Select Off to turn this feature off.
Select On to turn this feature on.
ECM Mode The Error Correction Mode helps with poor line quality and ensures that
faxes are sent smoothly to any other ECM-equipped fax machine. If the line
quality is poor,
it takes more time to send a fax when you are using the ECM
mode.
Select Off to turn this feature off.
Select On
to turn this feature on.
Modem Speed Select the maximum modem speed you want if the phone line fails to sustain
a higher modem speed. You can select 33.6, 28.8, 14.4, 12.0, 9.6, or 4.8 kbps.
Setup Wizard Frequently used functions are gathered for users to set fax settings easily.
a You can set the printer to forward all outgoing or incoming faxes to specified e-mail addresses. Refer to "Fax Forward to
E-mail addresses".
Option Description