Users Guide

189
Sending a Fax Manually
1 Load the document(s) face up with top edge in first into the DADF (Duplex Automatic
Document Feeder).
OR
Place a single document face down on the document glass.
For details about loading a document, see "
Loading an Original Document".
2 Press Fax Manual Send from the home screen.
3 Press the Next ( ) button.
4 Press the Direct Input or Fax List .
5 If necessary, adjust the document contrast and resolution to suit your fax needs. See
"
Adjusting the Document Contrast" or "Adjusting the Document Resolution"
6 Enter the remote fax phone number using the pop-up keyboard.
7 Press Start ( ) . (on the touch screen or the operator panel)
8 When the document is loaded from the document glass, the display shows Another
Page?
on the screen after the document is scanned into the memory. If you have
additional pages, remove the scanned page and load the next page from the glass and
select . Repeat as necessary.
After all of the pages are scanned, select when the display shows
Another Page?
9 When the printer establishes contact with the receiving machine, it dials the number
and sends the fax.
NOTE: Press to cancel the fax job at any time while sending the fax.