Users Guide
Table Of Contents
- Dell™ 2355dn Laser MFP User’s Guide
- Contacting Dell
- Finding Information
- Contents
- Unpacking Your Printer
- About Your Printer
- Introducing the Home Screen
- Internal Fonts
- Setting up the hardware
- Installing the Toner Cartridge
- Loading Paper
- Making Connections
- Powering On the Printer
- Dell 2355dn Laser MFP Menu Functions
- Printing the Printer setting and Op-panel Menu setting
- Setting the Machine ID
- Changing the Display Language
- Selecting Country
- Power Save Mode
- Setting the Sound/Volume
- Setting Daylight Savings Time (Only for USA)
- Scanner Lamp Power Save Mode
- Changing the Default Mode
- Setting the Time Out Option
- Setting the Job Management
- Setting the Toner Save Mode
- Setting the Timing of Toner Low Alert
- Ignoring Blank Pages
- Ignoring the Toner Low Message (Only for Fax)
- Software Overview
- Dell Printer Configuration Web Tool
- Installing Software in Microsoft® Windows® Operating System
- Uninstalling Software
- Using the Dell Toner Management System
- Printer Settings Utility
- Firmware Update Utility
- Set IP Address Utility
- Paper Handling
- Printing
- Copying
- Scanning
- Scanning Overview
- SmarThru Office
- Scanning Using Dell Scan Manager
- Scanning to a PC Application
- Scanning and Sending an Email
- Scanning and Sending to SMB Server
- Scanning and Sending to FTP Server
- Scanning and Sending Custom Email
- Scan to Fax Server
- Scanning Using the Windows Image Acquisition (WIA) Driver
- Scanning to the USB Memory
- Managing the USB Memory
- Scan to Email Setup
- Scanning by a network connection
- Setting up Address Book
- Group Numbers
- Changing Default Settings
- Networking
- Faxing
- Macintosh
- Linux
- Maintenance
- Troubleshooting
- Installing Accessories
- Specifications
- Index
156
Scanning Using the Default Settings
1
Insert the USB memory key into the USB memory port on your printer.
NOTE: Insert the USB memory key as soon as the pop-up window appears.
2
Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see "
Loading an Original Document".
3
Press
Scan
from the home screen.
4
Press the left/right arrows to select
USB
.
5
Press the
Next
( ) button.
6
If necessary, customize the scan settings including original size, scan color, scan format,
duplex, and image quality by using
Options
.
7
Press
Start
(
)
. (on the touch screen or the operator panel)
Your printer begins scanning the document and saves it to your USB memory.
8
After printing is completed, you can remove the USB memory device from the machine.