User Manual

189
6 Select whether you want this printer to be the default printer for the client, and then click
Finish .
7 Print a test page to verify printer installation.
When a test page prints successfully, printer installation is complete.
To print a test page:
1 For Windows 2000, click the Start button Settings Printer .
For Windows XP/Server 2003, click the
Start button and point to Printers and Faxes .
For Windows Vista/Server 2008, click the
Start button and click Control Panel
Hardware and Sound Printers
.
For Windows 7, click the
Start button and click Control Panel Hardware and Sound
Devices and Printers
.
For Windows Server 2008 R2, click the
Start button and click Control Panel
Hardware Devices and Printers
2 Double-click your printer icon.
3 Click the File menu and point to Properties .
4 Click the General tab, and select Print Test Page .
Setting Up a Network-connected Printer
You must set up the network protocols on the printer to use it as your network printer. Protocols
can be set up by the following two methods:
1 Via Network Administration Programs
You can configure your printer’s print server settings and manage it via the following programs:
•
Set IP Address Utility : A utility program allowing you to find your network printer and
manually configure the addresses for use with the TCP/IP protocol.
•
Embedded Web Service : A web server embedded to your network print server, which
allows you to:
Configure the network parameters necessary for the printer to connect to various network
environments.
2 Via the Operator Panel
You can configure the basic network parameters through the printer’s operator panel. Use the
printer operator panel to do the following:
→
→
→
→
→
→
→
→