User Manual

103
Setting the paper feeding flow
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select Tray Behavior .
4 Press the up/down arrows to select Configure MPF .
5 Press the left/right arrows to select the paper tray you are using.
•
Tray Mode : When sending a print job from the computer, the printer uses paper in the
tray which you have already set in Printer properties. In this mode the MPF is treated as
another paper tray. Instead of treating MPF as first preference paper source, printer
pulls paper from the tray that matches the size and type. The first preference goes to the
default source.
•
Bypass Mode : When sending a print job from the computer and the MPF is filled with
paper, the printer uses the paper in the MPF first. In this mode the printer pulls the paper
from MPF first unless it is closed or empty. MPF gets the highest priority and pulls
whatever media present in the MPF.
Bypass Mode is set as a default setting.
6 Press the home icon ( ) to return to the Standby mode.
Setting the paper auto feeding
When the paper is mismatched, the machine waits for a while (about few seconds) and starts
printing automatically even if the paper mismatches.
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select Tray Behavior .
4 Press the up/down arrows to select the Auto Continue .
5 Press the left/right arrows to select the On you want to use.
6 Press the home icon ( ) to return to the Standby mode.