User`s guide

To continue to the next setup, press Scroll ( or ) to select No and then press Select (
).
The display asks if you want to send the e-mail to yourself.11.
To send to your e-mail address, press Select ( ) to select Yes .
Or, press Scroll ( or ) to select No and then press Select ( ).
Enter the email subject and then press Select ( ).12.
Press Scroll ( or ) to select the file type to which the scanned image may be converted and then
press Select ( ).
13.
Press Scroll ( or ) to select the resolution you want and then press Select ( ).14.
Press Start ( ) or Select ( ).15.
The printer begins scanning and then sends the e-mail.
If the display asks if you want to log off your account, press Scroll ( or ) to select Yes or No and
then press Select ( ).
16.
Your printer returns to the Standby mode.
Sending an Email using an Global Address via LDAP server
NOTE: You first need to configure the LDAP server settings. See "Network authorized user by LDAP"
for network parameters.
NOTE: You need to configure the User Setup settings in order to use the emails. See "Setting up an
e-mail account" .
Load a document into the DADF or place it on the document glass.1.
Press Scroll ( or ) to highlight Scan and then press Select ( ).2.
Press Scroll ( or ) to highlight Email and then press Select ( ).3.
Press Scroll ( or ) to highlight Global Address Book and then press Select ( ).4.
Enter the sender's name and then press Select ( ).5.
Downloaded from ManualsPrinter.com Manuals