User`s guide

NOTE: You need to configure the User Setup settings in order to use the emails. See "Setting up an
e-mail account" .
Load a document into the DADF or place it on the document glass.1.
Press Directory ( ) in the operator panel.2.
Press Scroll ( or ) to highlight Email and then press Select ( ).3.
Press Scroll ( or ) to highlight Global Email and then press Select ( ).4.
Enter the sender's name and then press Select ( ).5.
Sender's name is the one you have set in the User Setup setting. See "Available Options for Email
Account Setup" .
Enter your login ID and then press Select ( ).6.
Login ID is the one you have set in the User Setup setting. See "Available Options for Email Account
Setup" .
Enter your login password and then press Select ( ).7.
Password is the one you have set in the User Setup setting. See "Available Options for Email Account
Setup" .
Press Scroll ( or ) to enter the recipient's email address and then press Select ( ).8.
NOTE: You can enter the name you have stored in the Address Book . See "Setting up Address
Book" .
The display asks if you want to enter another address.
To enter an additional address, press Scroll ( or ) to select Add and repeat step 8 .9.
To continue to the next step, press Select ( ) when Done appears.
The display asks if you want to review addresses.10.
Press Scroll ( or ) to review addresses, press Select ( ) to select Yes and check the
address you have entered.
11.
Downloaded from ManualsPrinter.com Manuals