User`s guide

5. Click Update Firmware.

Set IP Address Utility

This program is for the network IP setting using the MAC

address which is the hardware serial number of the network

printer card or interface. Especially, it is for the network

administrator to set several network IPs at the same time.

1. Connect the network cable to your machine.

2. Print the Network Configuration page of the printer to see the current network configuration and MAC

address.

3. From the Start menu, select Programs Dell Printers Dell 2335dn MFP Set IP Address

Utility.

4. Click in the SetIP window to open the TCP/IP configuration window.

5. Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click

Apply.

6. Click OK.

7. Click Exit to close the SetIP program.

NOTE: You can only use Set IP Address Utility when your printer is connected to a network.

NOTE: when you enter the MAC address, enter it without colon(:).

Page 5

of 5