User`s guide

11. Press Cancel ( ) to return to the Standby mode.
Ignoring Blank Pages
The printer detects the printing data from computer whether
a page is empty or includes any data. To skip the blank pages
at printing document, follow these steps:
1. Press Scroll ( or ) to highlight Setup and then press Select ( ).
2. Press Scroll ( or ) to highlight Machine Setup and then press Select ().
3. Press Scroll ( or ) to highlight Print Blank Pages and then press Select ().
4. Press Scroll ( or ) to change the setting to Do Not Print.
5. Press Select ( ) to save the selection.
6. Press Cancel ( ) to return to the Standby mode.
Setting the Job Management
1. Press Scroll ( or ) to highlight Setup and then press Select ( ).
2. Press Scroll ( or ) to highlight Job Management and then press Select ( ).
3. Press Scroll ( or ) to display the option and then press Select ( ).
z Stored Jobs: Print jobs currently stored in the hard disk. When a user sends a confidential job
from PC to the device, it will hold the job until you release it with your password.
z Job Expiration: Limits the amount of time a confidential job stays in the printer before it is
deleted.
z Clear Stored Job: You can delete jobs currently stored in the hard disk and RAM disk. If you
select the ALL, all Secure Jobs and Stored Prints are deleted.
4. Set each option as you want and then press Select ( ).
5. Press Cancel ( ) to return to the Standby mode.
Software Overview
After setting up your printer and connecting it should read as
to your computer, you must install the drivers and utilities
from the DRIVERS AND UTILITIES CD included with your
Page 2
9
of 5
2