User`s guide

cartridge beyond what one would experience in th
e
normal
mode, but it reduces print quality.
1. Press Scroll ( or ) to highlight Setup and then press Select ( ).
2. Press Scroll ( or ) to highlight Machine Setup and then press Select ( ).
3. Press Scroll ( or ) to highlight Toner Save and then press Select ( ).
4. Press Scroll ( or ) to change the setting to On (enable) or Off (disable).
Selecting On means that the printer uses less toner than normal printing.
5. Press Select ( ) to save the selection.
6. Press Cancel ( ) to return to the Standby mode.
Setting the Levels of Toner Low Alert
You can customize the level to alert toner low or toner empty.
If the current toner’ amount drops below the setting level, the
device will display a warning message on the operator panel.
1. Press Scroll ( or ) to highlight Setup and then press Select ().
2. Press Scroll ( or ) to highlight Machine Setup and then press Select ( ).
3. Press Scroll ( or ) to highlight Toner Status Alert and then press Select ( ).
4. Press Scroll ( or ) to highlight Toner Low and then press Select ( ).
5. Press Scroll ( or ) to display the Toner Low level you want.
The available levels are 20, 30, 40, and 50 (%).
6. Press Scroll ( or ) to display the Alert on Panel and then press Select ( ).
7. Press Scroll ( or ) to change the setting to On (enable) or Off (disable).
Selecting Off means that the printer does not display the Toner Low message.
8. Press Scroll ( or ) to display the Almost Empty level you want.
The available levels are 5, 10, and 15 (%).
9. Press Scroll ( or ) to display the Alert on Panel and then press Select ( ).
10. Press Scroll ( or ) to change the setting to On (enable) or Off (disable).
Selecting Off means that the printer does not display the Almost Empty message.
Page 28 of 5
2