User`s guide

faxing after changing the settings on the operator panel
.
1. Press Scroll ( or ) to highlight Setup and then press Select ( ).
2. Press Scroll ( or ) to highlight Machine Setup and then press Select ( ).
3. Press Scroll ( or ) to highlight Timeout and then press Select ( ).
4. Press Scroll ( or ) to display the timeout value you want.
The available time options are 15, 30, 60 and 180
(seconds).
You can select from 15, 30, 60 and 180 (seconds).
Selecting Off means that the printer does not restore the
default settings until you press Start ( ) to begin
copying or faxing, or Cancel ( ) to cancel.
5. Press Select ( ) to save the selection.
6. Press Cancel ( ) to return to the Standby mode.
Setting the Default Mode
Your machine is preset to Fax mode. You can switch this
default mode to Copy mode or Scan mode.
1. Press Scroll ( or ) to highlight Setup and then press Select ().
2. Press Scroll ( or ) to highlight Machine Setup and then press Select ( ).
3. Press Scroll ( or ) to highlight Default Mode and then press Select ( ).
4. Press Scroll ( or ) to display the mode you want.
5. Press Select ( ) to save the selection.
6. Press Cancel ( ) to return to the Standby mode.
Setting the Toner Save Mode
Toner Save mode allows your machine to use less toner on
each page. Activating this mode extends the life of the toner
Page 2
7
of 5
2